Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 53145-38-3, name is 2-Chloro-6-fluoroanisole, A new synthetic method of this compound is introduced below., Computed Properties of C7H6ClFO
2,6-CFA (10.0 g, 62. 28 mmol) was weighed in a separate flask and transferred to a 3-neck, 500-ml round bottom flask equipped with a thermocouple temperature probe, stir bar, and a N2 inlet. The flask was rinsed with anhydrous DME. Additional DME was added to the reaction flask to give a total DME volume of 106 ml. The reaction was cooled to -78C with a dry ice/acetone bath. Once the reaction reached -77C, ft-BuLi (29 ml, 71.62 mmol, 2.5 M in hexanes) was added slowly, dropwise, using a syringe pump over a 45 minute period. The highest temperature reached during addition was -70.1 C. After complete addition of w-BuLi, the reaction was left to stir for 1 hour at -74.1C. After 1 hour, B(OMe)3 (10.5 ml, 93.42 mmol) was added dropwise using a syringe pump over a period of 22 minutes. The highest temperature reached during the B(OMe)3 addition was -67.0C. After the complete addition of B(OMe)3, the dry ice/acetone bath was removed and the reaction mixture warmed to room temperature (about 23.1 C). Once the reaction mixture reached room temperature, the reaction was left to stir an additional 1 hour at that temperature. This procedure was repeated several times to generate a large amount of PBA-diMe in DME. 244.0 g of PBA-diMe in DME (10.3% PBA basis), 27.82 g of 45% KOH, and 108.70 g of deionized water were added to a one liter flask containing a magnetic stirrer. The one liter flask was cooled with a cold water bath to maintain a temperature of 25C to 30C during the additions. The mixture was stirred for about 2 h and was then vacuum filtered to remove lithium salts. Aqueous and organic phases of the mixture were then separated. Concentrated HC1 (40.48 g) was added to the aqueous phase. The aqueous phase was cooled with a cold water bath during the addition of the HC1 to maintain a temperature of 25C to 30C. The aqueous phase was stirred for about 15 minutes to achieve complete dissolution. MIBK (35.91 g) was added to the aqueous phase and the aqueous phase was stirred for about 15 minutes. An organic phase separated from an aqueous phase to give 127.6 g of the organic phase. Analysis of the organic phase gave 17.57% by weight (89.1% yield) of PBA. The organic phase was concentrated to dryness and then placed in a vacuum oven at 50C to give a white solid.
The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.
Reference:
Patent; DOW AGROSCIENCES LLC; OPPENHEIMER, Jossian; WO2013/101665; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics