Category: 1127-85-1

Application of 1127-85-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1127-85-1 name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of 2,4-dichloro-5,6,7,8-tetrahydro-quinazolin (7.00 g, 34.5 mmol) in THF (70 ml_) was added 50% aqueous MeNH2 (7.77 g, 86.2 mmol). The mixture was stirred at ambient temperature for 2.25 hr. The solution was poured into saturated aqueous NaHCO3 and the aqueous layer was extracted with CHCI3 (three times). The combined organic layer was dried over MgSO4, filtrated, concentrated, and purified by flash chromatography (NH-silica, 20% EtOAc in hexane) to give (2-chloro-5,6,7,8-tetrahydro-quinazolin-4-yl)-dimethyl-amine (6.08 g, 83%) as a white solid. ESI MS m/e 234, M + Na+; 1H NMR (300 MHz, CDCI3) 8 1.62-1.90 (m, 4 H), 2.59 (t, J= 6.0 Hz, 2 H), 2.76 (t, J= 6.6 Hz, 2H), 3.06 (s, 6 H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, and friends who are interested can also refer to it.

Reference:
Patent; Taisho Pharmaceutical Co. Ltd.; Arena Pharmaceuticals, Inc.; EP1464335; (2004); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline

2,4-Dichloro-5,6,7,8-tetrahydroquinazoline(103 mg, 0.640 mmol) and K2CO3 (265 mg, 1.92 mmol) were dissolved in DMF (3.2 ml), and then 3-fluorobenzenethiol (110 mg, 0.767 mmol) was slowly added dropwise and stirred at room temperature for 2 hours .After confirming the termination of the reaction, the reaction solution was diluted with dichloromethane and extracted several times with distilled water. The separated organic layer was dried over anhydrous MgSO4, filtered under reduced pressure, and concentrated.The concentrated filtrate was separated and purified by silica gel column chromatography (Hex: EtOAc = 18: 1) and purified to obtain the desired compound (181 mg, 96%) as a white solid.

The synthetic route of 1127-85-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; Nam, Ghil-Soo; Choo, Hyun-Ah; Choi, Kyung-Il; (40 pag.)KR101730790; (2017); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2,4-dichloropyrrolo[1,2-f][1,2,4]triazine (4a) (0.5 g, 2.7 mmol) in 2-Propanol (6 mL) was added (S)-pyrrolidin-2-ylmethanol (0.39 mL, 4.0 mmol), DIPEA (1.39 mL, 8.0 mmol) and heated at 90 C for 1 hr. The reaction was cooled to room temperature and solid obtained was collected by filtration to afford (S)-(l-(2-chloropyrrolo[2,l-f][l,2,4]triazin-4- yl)pyrrolidin-2-yl)methanol (96a) (0.49 g, 73 % yield) as a white solid; NMR (300 MHz, DMSO-i/e): delta 7.70 (dd, J= 2.6, 1.4 Hz, 1H), 6.97 (dd, J= 4.7, 1.6 Hz, 1H), 6.80 – 6.57 (m, 1H), 5.15 (t, J = 5.7 Hz, 1H, D2O exchangeable), 4.87 (t, J= 5.7 Hz, 1H), 4.44 (d, J= 17.8 Hz, 1H), 4.05 – 3.82 (m, 1H), 3.72 – 3.39 (m, 2H), 2.22 – 1.84 (m, 4H). MS (ES+): 253.3, 255.3 (M+2); MS (ES-): 287.2, 289.2 (M+Cl).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; KOTIAN, Pravin, L.; BABU, Yarlagadda, S.; KUMAR, V., Satish; ZHANG, Weihe; LU, Peng-Cheng; RAMAN, Krishnan; (747 pag.)WO2018/232094; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 1127-85-1, These common heterocyclic compound, 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Reference Example 39 (S)-1-(2-chloro-5,6,7,8-tetrahydroquinazolin-4-yl)-N-methylpiperidine-3-carboxamide Diisopropylethylamine (3.4 ml, 19.7 mmol) was added into chloroform (25 ml) solution of 2,4-dichloro-5,6,7,8-tetrahydroquinazoline (1 g, 4.92 mmol) prepared in Reference Example 33 and (R)-(-)-3-piperidinecarboxylic acid (0.7 g, 5.42 mmol), and then they were stirred at 60 C. for 2 days. After cooling the reaction solution to room temperature, methylamine hydrochloride (0.33 g, 4.92 mmol), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (0.94 g, 4.92 mmol) and 1-hydroxybenzotriazole hydrate (0.67 g, 4.92 mmol) were added thereto, they were stirred at room temperature overnight. The reaction solution was diluted with dichloromethane, washed with water, dried with anhydrous magnesium sulfate, and concentrated under reduced pressure. The resulting residue was crystallized by using ether/ethyl acetate to give the titled compound (436 mg) as a pale yellow solid. 1H NMR (400 MHz, CDCl3) delta 6.22 (m, 1H), 3.93 (m, 1H), 3.74 (m, 1H), 3.34 (m, 1H), 3.10 (m, 1H), 2.81 (m, 4H), 2.49 (m, 3H), 1.93-1.84 (m, 4H), 1.70-1.60 (m, 4H).

The synthetic route of 1127-85-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; YUHAN CORPORATION; SIM, Jae Young; CHA, Myung; KIM, Tae Kyun; YOON, Young Ae; KIM, Dong Hoon; (59 pag.)US2016/90374; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 1127-85-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1127-85-1 name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To the solution of compounds 22 (0.3 g, 1.5 mmol) in DMF wereadded K2CO3 (1.95 mmol) and 4-amino-1-Boc-piperidine (2.7 mmol). The reaction was stirred at 80 C for 8 h. Then the mixture was extractedwith ethyl acetate, washed with brine, dried over MgSO4, andevaporated. The residue was purified by column chromatography togive the product (0.5 g, 92% yield).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, and friends who are interested can also refer to it.

Reference:
Article; Fang, Yuanying; Xiong, Lijuan; Hu, Jianguo; Zhang, Shaokun; Xie, Saisai; Tu, Liangxing; Wan, Yang; Jin, Yi; Li, Xiang; Hu, Shaojie; Yang, Zunhua; Bioorganic Chemistry; vol. 86; (2019); p. 103 – 111;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2,4-dichloro-5-fluoroquinazoline (22a) (100.00mg, 460.77 mumol, 1.00 eq) in THF (3.00mL) was added methyl (2S,3S)-3-aminobicyclo[2.2.2]octane-2-carboxylate (84.44mg, 460.77 mumol, 1.00 eq) and DIPEA (238.20mg, 1.84mmol, 4.00 eq) at room temperature overnight. H2O (20mL) was added to the mixture and extracted with EtOAc (10mL×3). The combined organic layers were dried over Na2SO4 and concentrated in vacuum. The residue was purified by column chromatography on silica gel with PE:EtOAc (10:1 to 5:1) to give compound 23a (130.00mg, 357.33 mumol, 77.55% yield) as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xiong, Jian; Wang, Jingjing; Hu, Guoping; Zhao, Weili; Li, Jianqi; European Journal of Medicinal Chemistry; vol. 162; (2019); p. 249 – 265;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline

2,4-dichloro-5,6,7,8-tetrahydroquinazoline (0.5 g, 2.46 mmol) was added to a round bottom flask and dissolved in tetrahydrofuran (30 mL), and furfurylamine (0.23 mL, 2.46 mmol) and triethylamine (1.03 mL, 7.39 mmol) were added thereto, followed by stirring at 60 C. for 1 hour. After completion of the reaction, the solvent was removed by distillation under reduced pressure and water was added to the reaction mixture. The resulting mixture was extracted with dichloromethane and dried over anhydrous magnesium sulfate, and the solvent was removed by distillation under reduced pressure. The residue was purified by column chromatography (ethyl acetate:hexane, 1:1, v/v) to obtain a compound (0.22 g, 34%); 1H NMR (400 MHz, CDCl3) delta 1.82 (s, 4H), 2.28 (s, 2H), 2.68 (s, 2H), 4.68 (d, J=4.8 Hz, 2H), 4.99 (s, 1H), 6.32 (d, J=12.4 Hz, 2H), 7.37 (s, 1H); 13C NMR (400 MHz, CDCl3) delta 21.82, 21.86, 21.91, 31.63, 38.20, 108.01, 110.53, 110.55, 142.37, 151.08, 157.37, 161.42, 164.43.

The synthetic route of 1127-85-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; LEE, So Ha; YOO, Kyung Ho; ROH, Eun Joo; SIM, Tae Bo; KIM, Tae Young; KIM, Jae Ho; (30 pag.)US2019/315726; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a stirred suspension of INT-6 (339 mg, 1.13 mmol) in anhydrous DMF (25 mL) was added t-BuOK (1M in THF, 2.26 mL, 2.26 mmol) at 0 C. dropwise to give a brown solution. The resulting solution was stirred for further 0.5 h at this temperature. 2,4-dichloro-5,6,7,8-tetrahydroquinazoline (299.1 mg, 1.13 mmol) in DMF (5 mL) was added dropwise to the above solution and the reaction was stirred overnight at room temperature. The reaction mixture was partitioned between ethyl acetate (30 mL) and water (40 mL), the organic layer was separated and the aqueous layer was extracted with ethyl acetate (2¡Á30 mL). The combined organic layers were washed with brine (80 mL) and the organic layer was separated, dried over Na2SO4, filtered and concentrated under reduced pressure. Purification by preparative HPLC afforded I-109 (87.4 mg, 29.2%) as a yellow solid. 1H NMR (400 MHz, DMSO-d6): delta 9.34 (d, J=9.2 Hz, 1H), 8.71 (s, 1H), 8.18-8.11 (m, 2H), 7.83 (d, J=9.2 Hz, 1H), 7.58 (d, J=9.2 Hz, 1H), 7.10-7.20 (m, 1H), 3.70 (s, 2H), 3.60-3.50 (m, 1H), 3.52-3.36 (m, 6H), 2.63-2.60 (m, 2H), 2.29 (s, 3H), 1.17 (d, J=7.8 Hz, 3H), 1.06 (t, J=7.8 Hz, 3H). MS m/z (M+H): 527.0.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Celgene Avilomics Research, Inc.; Alexander, Matthew David; Chuaqui, Claudio; Malona, John; McDonald, Joseph John; Ni, Yike; Niu, Deqiang; Petter, Russell C.; Singh, Juswinder; (164 pag.)US2016/75720; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, A new synthetic method of this compound is introduced below., Recommanded Product: 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline

To THF (15 mL) were added (+/-)-trans-methyl 3-aminobicyclo[2.2.2]octane-2-carboxylate (0.68 g, 3.69 mmol), 2,4-dichloro-5,6,7,8-tetrahydroquinazoline (1.13 g, 2.46 mmol) and DIPEA (4.5 mL, 24.6 mmol). The mixture was stirred at 65 C overnight. The reaction mixture was quenched with water (100 mL). The resulting mixture was extracted with ethyl acetate (50 mL x 2). The combined organic layers were washed with saturated brine (80 mL), dried over ahydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo, and the residue was purified by silica gel column chromatography (PE/EtOAc (v/v) = 4/1) to give the title compound as a white solid (862 mg, 17%).MS (ESI, pos. ion) m/z: 350.2 [M+H]+1H NMR (400 MHz, CDC13) (ppm): 4.75 (d, J = 5.1 Hz, 1H), 4.43 (t, J = 5.3 Hz, 1H), 3.77 (s, 3H), 2.68 (t, J= 5.9 Hz, 2H), 2.35 (d, J= 5.7 Hz, 1H), 2.29-2.23 (m, 2H), 2.05 (s, 1H), 1.96 (d, J = 2.5 Hz, 1H), 1.89-1.76 (m, 6H), 1.67-1.54 (m, 5H), 1.26 (d, J= 7.1 Hz, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; REN, Qingyun; TANG, Changhua; LIN, Xiaohong; YIN, Junjun; YI, Kai; (270 pag.)WO2017/97234; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, molecular formula is C8H8Cl2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 1127-85-1

General procedure: To a solution of 2,4-dichloropyrrolo[1,2-f][1,2,4]triazine (4a) (0.5 g, 2.7 mmol) in 2-Propanol (6 mL) was added (S)-pyrrolidin-2-ylmethanol (0.39 mL, 4.0 mmol), DIPEA (1.39 mL, 8.0 mmol) and heated at 90 C for 1 hr. The reaction was cooled to room temperature and solid obtained was collected by filtration to afford (S)-(l-(2-chloropyrrolo[2,l-f][l,2,4]triazin-4- yl)pyrrolidin-2-yl)methanol (96a) (0.49 g, 73 % yield) as a white solid; NMR (300 MHz, DMSO-i/e): delta 7.70 (dd, J= 2.6, 1.4 Hz, 1H), 6.97 (dd, J= 4.7, 1.6 Hz, 1H), 6.80 – 6.57 (m, 1H), 5.15 (t, J = 5.7 Hz, 1H, D2O exchangeable), 4.87 (t, J= 5.7 Hz, 1H), 4.44 (d, J= 17.8 Hz, 1H), 4.05 – 3.82 (m, 1H), 3.72 – 3.39 (m, 2H), 2.22 – 1.84 (m, 4H). MS (ES+): 253.3, 255.3 (M+2); MS (ES-): 287.2, 289.2 (M+Cl).

The chemical industry reduces the impact on the environment during synthesis 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; KOTIAN, Pravin, L.; BABU, Yarlagadda, S.; KUMAR, V., Satish; ZHANG, Weihe; LU, Peng-Cheng; RAMAN, Krishnan; (747 pag.)WO2018/232094; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics