Category: 1871-57-4

Adding a certain compound to certain chemical reactions, such as: 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1871-57-4, 1871-57-4

General procedure: To a cooled solution (5 C) of the corresponding 4,6-O-(R)-benzylidene-d-hexopyranoside derivative (obtained using the procedure describe by our group2c) (35.4 mmol) in dry THF (70 mL) were added, successively, freshly powdered potassium hydroxide (7.0 g, 125 mmol), 18-crown-6 (0.38 g, 1.4 mmol), and 3-chloro-2-chloromethylpropene (4.1 mL, 35.4 mmol). The reaction mixture was stirred at this temperature for 3 h, and left at room temperature until all the starting material had been consumed, as monitored by TLC (5-7 days, approximately), then diluted with dichloromethane (60 mL) and washed successively with water and aqueous saturated solution of sodium bicarbonate, dried (MgSO4), filtered, and the filtrate was evaporated to dryness.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-2-chloromethyl-1-propene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Vega-Perez, Jose M.; Vega-Holm, Margarita; Perinan, Ignacio; Palo-Nieto, Carlos; Iglesias-Guerra, Fernando; Tetrahedron; vol. 67; 2; (2011); p. 364 – 372;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1871-57-4, Adding some certain compound to certain chemical reactions, such as: 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1871-57-4.

Step 1: methyl 14-cyclohex^l-7-meiksiotalene-7.&-dihydro-6H-indolol.2-e]fl.5]benzoxazocine-ll- carboxylate; To a solution of methyl 3-cyclohexyl-2-(2-hydroxyphenyl)-lH-indole-6-carboxylate (prepared as described in example 9, step 1) in dry DMF (0.06 M) was added NaH (2.5 eq., 60% suspension in mineral oil). After 30 min, 3-chloro-2-(chloromethyl)prop-l-ene (1.2 eq.) was added dropwise via syringe and EPO the solution stirred at RT for 60 min. The reaction mixture was diluted with EtOAc and washed with IN aqueous HCl and with brine, dried (Na2SO4) and evaporated. The crude residue was purified by flash chromatography (10:1 PE/EtOAc), affording the pure methyl 14-cyclohexyl-7-methylene-7,8-dihydro- 6H-indolo[l,2-e][l,5]benzoxazocine-l l-carboxylate (70%) as light yellow foam; MS (ES+) m/z 402 (M+H)+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1871-57-4.

Reference:
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P ANGELETTI SPA; WO2006/46030; (2006); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1871-57-4, A common compound: 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, belongs to chlorides-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

[0102] A tubular reactor was configured 300 with a static mixer 305, a T-mixer 310 and an elevated temperature stage 322 as illustrated schematically in FIG. 8. An organic stream 328 containing 3-chloro-2-(chloromethyl)prop-1-ene (1 equiv.), CHBr3 (5 equiv.), 18-crown-6 (5 mol %), pinacol (8.5 mol %), and methylene chloride (4 vol.) was mixed with an aqueous33% NaOH stream 329 at about 70C using mixers 305, 310 in the tubular reactor 300 to form1,1 -dibromo-2,2-bis(chloromethyl)cyclopropane 330. Flow rates were controlled by using the back pressure regulator 370 and by using the syringe pumps 335, 340 to deliver the organic and aqueous streams. The mixers 335, 340 were located in the elevated temperature stage 322 as illustrated in FIG. 8 and included a T-junction (T-mixer) 310 and a 29 element in-line static mixer 305 having a diameter about the same as that of the reactor tubing. The static mixer 305 includes counterhelices to achieve mixing of the biphasic stream in laminar flow. The residence time in the elevated temperatures stage 322 was about one hour. The yield of 1,1 – dibromo-2,2-bis(chloromethyl)cyclopropane 330 was – 9%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-2-chloromethyl-1-propene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ZENO ROYALTIES & MILESTONES, LLC; PINCHMAN, Joseph, Robert; BUNKER, Kevin, Duane; BIO, Matthew, M.; BREEN, Christopher; CLAUSEN, Andrew, M.; FANG, Yuanqing; LI, Hui; SHEERAN, Jillian, W.; (61 pag.)WO2019/51038; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1871-57-4, These common heterocyclic compound, 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step A: 1-Phthalimido-3-Chloro-2-Methylenepropane A mixture of 3-chloro-2-chloromethyl-1-propene (6.55 g, 50 mmol) and potassium phthalimide (5.6 g, 30 mmol) in anhydrous dimethylformamide (200 ml) was heated two days at 50 C. Then the mixture was concentrated in vacuo and, after usual work-up, the product was purified by flash chromatography on silica gel (ethyl acetate:hexane; 15:85) (4.2 g, 78%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1871-57-4.

Reference:
Patent; Merrell Dow Pharmaceuticals Inc.; US5308837; (1994); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, molecular formula is C4H6Cl2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 1871-57-4

Step 2: ((2-(chloromethyl)allyloxy)methyl)benzeneTo an over-dried flask was added DME (240 mL), sodium hydride (4.12 g, 120 mmol), and then benzyl alcohol (12.4 mL, 120 mmol) was added dropwise. After the addition was complete the mixture was heated to reflux for 1 hour. The mixture was cooled to 0 C in an ice-water bath and 3-chloro-2-(chloromethyl)prop-1-ene (12.7 mL, 120 mmol) was added in one portion. The mixture was heated to reflux for 19 hours, cooled to room temperature, and poured into saturated sodium hydrogen carbonate solution (250 mL). The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were dried with anhydrous sodium sulphate, filtered, and concentrated in vacuo to give a residue which was fractionated to give ((2-(chloromethyl)allyloxy)methyl)benzene (10.7 g, 45.5%) as a colorless oil. LCMS (m/z, ES+) = 219 (M+1 )

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1871-57-4, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; JOHNS, Brian Alvin; SHOTWELL, John Brad; HAIGH, David; WO2012/67663; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1871-57-4 as follows. 1871-57-4

To sodium hydride (60 wt.% in mineral oil, 2.464 g, 61.6 mmol) in DMF (50 mL) was added 3-chloro-2-(chloromethyl)prop-l-ene (3.5 g, 28.0 mmol) at ~5 C (ice bath) and a solution of tert-butyl(2-hydroxyethyl)carbamate (4.51 g, 28.0 mmol) in tetrahydrofuran (50 mL). The reaction mixture was stirred at 20-30 C for ~2 hrs and concentrated under reduced pressure to remove tetrahydrofuran. The resulting mixture was poured into water and extracted with EtOAc. The combined organic extracts were washed with brine, dried over sodium sulfate, filtered off and concentrated under reduced pressure. The residue was purified by column chromatography [silica gel, 80 g, EtO Ac/heptane = 0/100 to 50/50] providing tert-butyl 6-methylene-l ,4-oxazepane-4- carboxylate (4 g) as a colorless oil. NMR (400 MHz, chloroform-d) delta [ppm]: 1.46 (s, 9 H) 3.33 – 3.62 (m, 2 H) 3.62 – 3.82 (m, 2 H) 4.09 (m, 2 H) 4.16 (m, 2 H) 4.99 (m,2 H).

According to the analysis of related databases, 1871-57-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NOVARTIS AG; PFISTER, Keith B; SENDZIK, Martin; WO2011/26917; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1871-57-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1871-57-4 as follows.

A solution of methyl 3-cyclohexyl-2-(2-hydroxyphenyl)-lH-indole-6-carboxylate (prepared as described in International patent application WO2006/046030) (0.12 M) in DMF was treated with KO1Bu (2.1 eq) in one portion; the resulting mixture was stirred for 30 min at RT then treated dropwise with 3-chloro-2-(chloromethyl)prop-l-ene (1.1 eq). The resulting solution was stirred at RT overnight before being quenched by addition of HCl (IN) and extracted into EtOAc. The combined organic layers were washed with sat. aq. NaHCO3 and brine, before being dried (Na2SO4), filtered and concentrated in vacuo. The crude material was purified by FC (PE/EtOAc 85:15) affording the product as a yellow oil (97%). (ES+) m/z 402 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1871-57-4, and friends who are interested can also refer to it.

Reference:
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P. ANGELETTI SPA; WO2009/10783; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics