Category: 1939-99-7

Adding a certain compound to certain chemical reactions, such as: 1939-99-7, name is Phenylmethanesulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1939-99-7, Application In Synthesis of Phenylmethanesulfonyl chloride

K2CO3 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0 C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2SO4, filtered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200-300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound N-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. 1H NMR (300 MHz, CDCl3) delta 7.40 (m, 5H), 4.58 (m, 1H), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Genentech, Inc.; Fauber, Benjamin; Gobbi, Alberto; Rene, Olivier; Bodil van Niel, Monique; Gancia, Emanuela; Gaines, Simon; Laddywahetty, Tammy; Vesey, David; Ward, Stuart; Winship, Paul; US2015/197529; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 1939-99-7, name is Phenylmethanesulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C7H7ClO2S

Preparation 7: N-(2-bromoethyl)(phenyl)methanesulfonamide K2C03 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2S04, filetered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200 – 300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound /V-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. H NMR (300 MHz, CDC13) delta 7.40 (m, 5H), 4.58 (m, IH), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

The synthetic route of Phenylmethanesulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; LADDYWAHETTY, Tammy; RENE, Olivier; (105 pag.)WO2016/96936; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 1939-99-7, These common heterocyclic compound, 1939-99-7, name is Phenylmethanesulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation 19: 3-Phenyl-l ,4,5-oxathiazepane 4,4-dioxide Step 1 : A/-(2-((Tert-butyldimethylsilyl)oxy)ethyl)- 1 -phenylmethanesulfonamide To a solution of 2-((tert-butyldimethylsilyl)oxy)ethanamine (11.7 g, 66.6 mmol) and triethylamine (11.2 mL, 79.9 mmol) in tetrahydrofuran (222 mL) at 0 C was slowly added phenylmethanesulfonyl chloride (12.7 g, 66.6 mmol) portion wise and the reaction was stirred at room temperature for 16 hours. MTBE was then added and the Et3N HCl salt was removed by filtration. The filtrate was then concentrated and purified by silica gel solumn chromatography (0-30% Acetone in heptane, 216 nM) to A^-(2-((tert-butyldimethylsilyl)oxy)ethyl)-l-phenylmethanesulfonamide (17.8 g, 81 % yield). LCMS (ESI), m/z, 330. [M+H] +.

The synthetic route of 1939-99-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; LADDYWAHETTY, Tammy; RENE, Olivier; (105 pag.)WO2016/96936; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1939-99-7, name is Phenylmethanesulfonyl chloride, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C7H7ClO2S

A solution of phenylmethanesulfonyl chloride (2.19 g, 10 mmol) was added into a suspension of 3-bromopropan-1-amine hydrobromide (2.19 g, 10 mmol) and Et3N (2.02 g, 20 mmol) in THF (50 mL) at 0 C. The mixture was stirred at 0 C for 5 mi TLC confirmed the completion of reaction. Solid was filtered out with suction, and the filtrate was concentrated to provide compound N-(3-bromopropyl)(phenyl)methanesulfonamide (2.7 g, quant.) as a pale yellow solid which was used in the next step without further purification. ?H NMR (300 MHz, CDC13) oe 7.40 (m, 5H), 4.48 (m, 1H), 4.27 (s, 2H), 3.41 (t, J = 6.6 Hz, 2H), 3.16 (q, 2H), 2.01 (m, 2H). LCMS (ESI), mlz, 314 and 316 [M+Na], Br pattern found.

The synthetic route of 1939-99-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; RENE, Olivier; WO2014/202741; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1939-99-7 as follows. HPLC of Formula: C7H7ClO2S

A stirred solution of ethyl(3-amino-2-oxo-1,2-dihydropyridyl)acetate (40.0 g, 0.204 mole) and 2,4,6-collidine (54 ML, 0.408 mole) in tetrahydrofuran (200 ML) was cooled in an ice bath.. A solution of benzylsulfonyl chloride (38.9 g, 0.204 mmole) in tetrahydrofuran (200 ML) was added over a 50-minute period.. After addition was complete, the solution was stirred for 30 minutes at 0 C. The reaction mixture was diluted with ethyl acetate (1.2 L), washed with 1.0N HCl (until aqueous layer is PH 1), water (50 ML), saturated sodium bicarbonate (100 ML), and brine (2*50 ML).. The organic layer was dried over anhydrous magnesium sulfate, and the solvent was removed.. The residue was recrystallized from chloroform. 39 g of the title compound was isolated.. To the mother liquor was added silica gel.. The solution was swirled, then filtered through a sintered glass funnel, washing with 50% ethyl acetate in dichloromethane.. The solvent was removed from the filtrate, and the residue was recrystallized from chloroform.. An additional 13 g of the title compound was isolated to afford a total of 52.00 g (75% yield) of the title compound as a tan solid. Rf=0.32 (silica gel, 20% ethyl acetate in dichloromethane); m.p. 48-49 C.

According to the analysis of related databases, 1939-99-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Corvas International, Inc.; US6342504; (2002); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1939-99-7, name is Phenylmethanesulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of Phenylmethanesulfonyl chloride

General procedure: Pyridine (73 lL, 0.90 mmol) and DMAP were added to a solution10a (203 mg, 0.7 mmol) in anhydrous DCM (10 mL). Then benzenesulfonylchloride (145 mg, 0.76 mmol) was dissolved in DCMand added dropwise under a nitrogen atmosphere. The reactionmixture was then stirred at room temperature for 1 day.Whereupon, HCl (1 mol/L) was added and the reaction mixturewas extracted with DCM. The organic phases were combined anddried over anhydrous Na2SO4. After removal of volatiles, a residuewas obtained that was then subjected to silica-gel column chromatographicpurification to afford this intermediate 13a (196 mg,63%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1939-99-7.

Reference:
Article; Liu, Peihong; Du, Yongli; Song, Lianhua; Shen, Jingkang; Li, Qunyi; Bioorganic and Medicinal Chemistry; vol. 23; 21; (2015); p. 7079 – 7088;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1939-99-7 as follows. Application In Synthesis of Phenylmethanesulfonyl chloride

To a solution of 2-((tert-butyldimethylsilyl)oxy)ethanamine (11.7 g, 66.6 mmol) and triethylamine (11.2 mL, 79.9 mmol) in tetrahydrofuran (222 mL) at 0 C was slowly added phenylmethanesulfonyl chloride (12.7 g, 66.6 mmol) portion wise and the reaction was stirred at room temperature for 16 hours. MTBE was then added and the Et3N-HCl salt was removed by filtration. The filtrate was then concentrated and purified by silica gel solumn chromatography (0-30% Acetone in heptane, 216 nM) to A^-(2-((tert-butyldimethylsilyl)oxy)ethyl)-l-phenylmethanesulfonamide (17.8 g, 81 % yield). LCMS (ESI), m/z, 330. [M+H] +.

According to the analysis of related databases, 1939-99-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; GANCIA, Emanuela; LADDUWAHETTY, Tammy; VESEY, David; WINSHIP, Paul; RENE, Olivier; (168 pag.)WO2017/5900; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1939-99-7, name is Phenylmethanesulfonyl chloride, A new synthetic method of this compound is introduced below., Application In Synthesis of Phenylmethanesulfonyl chloride

To a solution of 2-((tert-butyldimethylsilyl)oxy)ethanamine (11.7 g, 66.6 mmol) and triethylamine (11.2 mL, 79.9 mmol) in tetrahydrofuran (222 mL) at 0 C. was slowly added phenylmethanesulfonyl chloride (12.7 g, 66.6 mmol) portion wise and the reaction was stirred at room temperature for 16 hours. MTBE was then added and the Et3N.HCl salt was removed by filtration. The filtrate was then concentrated and purified by silica gel solumn chromatography (0-30% Acetone in heptane, 216 nM) to N-(2-((tert-butyldimethylsilyl)oxy)ethyl)-1-phenylmethanesulfonamide (17.8 g, 81% yield). LCMS (ESI), m/z, 330. [M+H]+.

The synthetic route of 1939-99-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Genentech, Inc.; Fauber, Benjamin; Gobbi, Alberto; Rene, Olivier; van Niel, Monique Bodil; Gancia, Emanuela; Gaines, Simon; Ladduwahetty, Tammy; Vesey, David; Ward, Stuart; Winship, Paul; (101 pag.)US2016/168141; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 1939-99-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1939-99-7, name is Phenylmethanesulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows.

K2CO3 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0 C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2SO4, filtered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200-300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound N-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. 1H NMR (300 MHz, CDCl3) delta 7.40 (m, 5H), 4.58 (m, 1H), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

The chemical industry reduces the impact on the environment during synthesis Phenylmethanesulfonyl chloride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Genentech, Inc.; Fauber, Benjamin; Gobbi, Alberto; Rene, Olivier; van Niel, Monique Bodil; Gancia, Emanuela; Gaines, Simon; Ladduwahetty, Tammy; Vesey, David; Ward, Stuart; Winship, Paul; (101 pag.)US2016/168141; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1939-99-7, name is Phenylmethanesulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., name: Phenylmethanesulfonyl chloride

Step 1 : N-re^butyl-1 -phenylmethanesulfonamide To a solution of teri-butylamine (2 g, 27.3 mmol) in dichloromethane (90 mL) was added N,N-diisopropylethylamine (5.7 mL, 32.8 mmol), followed by phenylmethanesulfonyl chloride (6.25 g, 32.8 mmol) and the reaction was stirred at ambient temperature for 16 hours. The reaction was then diluted with dichloromethane, washed with water and brine, dried with MgS04, and purified by silica gel column chromatography (0-50% EtOAc in heptane) to give N-teri-butyl-l-phenyl- methanesulfonamide (4.81 g, 77% yield). 1 H NMR (400 MHz, CDC13) delta 7.51 – 7.44 (m, 2H), 7.41 (dd, J= 4.9, 2.0 Hz, 3H), 4.49 (s, 2H), 4.27 (s, 1H), 1.68 (s, 6H); LCMS (m/z) ES+ 228 [M+l]+.

According to the analysis of related databases, 1939-99-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; FAUBER, Benjamin; RENE, Olivier; WO2013/92941; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics