Category: 220227-21-4

Adding a certain compound to certain chemical reactions, such as: 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 220227-21-4, Formula: C6H2ClF3O2S

A mixture of 2,4,5-trifluorobenzene-1-sulfonyl chloride (5.00 g, 21.7 mmol), 2,4- dimethoxybenzylamine (3.63 g, 21.7 mmol), diethylpropylethylamine (3.36 g, 26.0 mmol) in dichloromethane (100 mL) was stirred at ambient temperature for 16 h. The mixture was diluted in dichloromethane (100 mL), washed with iN hydrochloric acid, 25% aqueous ammonium chloride and brine, dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo and the residue was crystallized from dichloromethane/hexanes to obtain N-(2,4-dimethoxybenzyl)-2,4,5- trifluorobenzenesulfonamide as a cream solid in 95% yield (7.5 g): 1H NMR (300 MHz, CDCI3) delta 7.55-7.47 (m, 1H), 6.81-6.76 (m, 2H), 6.25-6.20 (m, 2H), 5.50 (s, 1H), 4.18 (5, 2H), 3.76-3.73 (m, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,4,5-Trifluorobenzene-1-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; XENON PHARMACEUTICALS INC.; SUN, Shaoyi; ZENOVA, Alla, Yurevna; CHAFEEV, Mikhail; JIA, Qi; ZHANG, Zaihui; OBALLA, Renata, Marcella; WO2013/64983; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 220227-21-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a solution of 1,3-dihydro-2H-imidazol-2-one (10,12 mg, 0.143 mmol) in DMF (1 mL) was added at 0 C NaH (60% in mineral oil,17.1 mg, 0.428 mmol). The suspension was warmed to rt over 30 min and thencooled to 0 C. To this was added ArSO2Cl (0.314 mmol). The solutionwas allowed to warm to rt over 12 h, at which point the reaction was quenchedby addition of brine (1 mL). The aqueous layer was separated and extracted withEtOAc (3×2 mL). The combined organic layers were washed with brine (3 mL),dried over Na2SO4, filtered, and concentrated in vacuo.The crude mixture was purified by column chromatography (gradient 0% to 100%EtOAc in hexanes) to afford bis(arylsulfonyl)dihydroimidazolinones (9a-9ac).

The chemical industry reduces the impact on the environment during synthesis 2,4,5-Trifluorobenzene-1-sulfonyl chloride. I believe this compound will play a more active role in future production and life.

Reference:
Article; Sittihan, Satapanawat; Jumpathong, Watthanachai; Sopha, Pattarawut; Ruchirawat, Somsak; Bioorganic and Medicinal Chemistry Letters; vol. 30; 1; (2020);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Formula: C6H2ClF3O2S

General procedure: A solution of compound 8 (90 mg, 0.44 mmol), 4-chlorobenzenesulfonyl chloride (103 mg, 0.49 mmol) and triethylamine (68 muL, 0.49 mmol) in dichloromethane (5 mL) was stirred at room temperature for 18 h. The reaction was quenched through the addition of water (20 mL) and the pH adjusted to pH 6-7 using aqueous phosphate buffer solution (0.5 M, pH 7). The mixture was then diluted with dichloromethane (20 mL) and the separated aqueous layer further extracted with dichloromethane (2 x 20 mL). The combined organic layers were washed with aqueous phosphate buffer solution (0.5 M, pH 7) (20 mL), dried over anhydrous magnesium sulfate, filtered and the filtrate concentrated in vacuo. Purification by flash chromatography (dichloromethane/methanol, 40:1) afforded compound 9a as a beige solid (96 mg, 0.25 mmol, 56%).

According to the analysis of related databases, 220227-21-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Brimble, Margaret A.; Cook, Gregory M.; Davison, Emma K.; Ferguson, Scott A.; Harbison-Price, Nichaela; Harper, Andrew D.; Heikal, Adam; Jeong, Joo Young; Knottenbelt, Melanie K.; Krittaphol, Woravimol; McConnell, Michelle A.; McGowan, John E.; Mros, Sonya; Rennison, David; Van Zuylen, Essie M.; Walker, Greg F.; Bioorganic and medicinal chemistry letters; (2020);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 220227-21-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of /V-(2,4-dimethoxybenzyl)-1 ,3,4-thiadiazol-2-amine (1.09 g, 4.30 mmol) in tetrahydrofuran (20 mL) was added lithium /)/’s(trimethylsilyl)amide (4.3 mL of a 1 M solution in tetrahydrofuran, 4.3 mmol) at -78 C. The reaction mixture was allowed to stir for 30 minutes at 0 C and a solution of 2,4,5- trifluorobenzenesulfonyl chloride (0.99 g, 4.3 mmol) in tetrahydrofuran (10 mL) was added dropwise at -78 C. After the addition was complete, the cooling bath was removed. The reaction mixture was stirred for 3 h at ambient temperature and saturated aqueous ammonium chloride (10 mL) was added. The resulting mixture was extracted with ethyl acetate (2 x 30 mL). The organic layer was washed with water and brine, dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo and the residue was purified by column chromatography eluting with 30% ethyl acetate in hexanes to afford /V-(2,4-dimethoxybenzyl)-2,4,5-trifluoro-/v’-(1 ,3,4- thiadiazol-2-yl)benzenesulfonamide in 57% yield (1.10 g) as a colorless solid: MS (ES+) m/z 446.0 (M + 1).

The synthetic route of 2,4,5-Trifluorobenzene-1-sulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; XENON PHARMACEUTICALS INC.; SUN, Shaoyi; ZENOVA, Alla, Yurevna; CHAFEEV, Mikhail; JIA, Qi; ZHANG, Zaihui; OBALLA, Renata, Marcella; WO2013/64983; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 220227-21-4, These common heterocyclic compound, 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of /V-(2,4-dimethoxybenzyl)-1 ,3,4-thiadiazol-2-amine (1.09 g, 4.30 mmol) in tetrahydrofuran (20 mL) was added lithium /)/’s(trimethylsilyl)amide (4.3 mL of a 1 M solution in tetrahydrofuran, 4.3 mmol) at -78 C. The reaction mixture was allowed to stir for 30 minutes at 0 C and a solution of 2,4,5- trifluorobenzenesulfonyl chloride (0.99 g, 4.3 mmol) in tetrahydrofuran (10 mL) was added dropwise at -78 C. After the addition was complete, the cooling bath was removed. The reaction mixture was stirred for 3 h at ambient temperature and saturated aqueous ammonium chloride (10 mL) was added. The resulting mixture was extracted with ethyl acetate (2 x 30 mL). The organic layer was washed with water and brine, dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo and the residue was purified by column chromatography eluting with 30% ethyl acetate in hexanes to afford /V-(2,4-dimethoxybenzyl)-2,4,5-trifluoro-/v’-(1 ,3,4- thiadiazol-2-yl)benzenesulfonamide in 57% yield (1.10 g) as a colorless solid: MS (ES+) m/z 446.0 (M + 1).

The synthetic route of 220227-21-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; XENON PHARMACEUTICALS INC.; SUN, Shaoyi; ZENOVA, Alla, Yurevna; CHAFEEV, Mikhail; JIA, Qi; ZHANG, Zaihui; OBALLA, Renata, Marcella; WO2013/64983; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 220227-21-4, A common heterocyclic compound, 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, molecular formula is C6H2ClF3O2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of A/-(2,4-dimethoxybenzyl)-3-methyl-1 ,2,4-thiadiazol-5- amine (1.14 g, 4.30 mmol) in tetrahydrofuran (20 mL) was added lithium N’s(trimethylsilyl)amide (1 M solution in tetrahydrofuran, 4.3 mL, 4.3 mmol) at -78 C. The reaction mixture was stirred for 30 minutes at 0 C and a solution of 2,4,5- trifluorobenzenesulfonyl chloride (0.99 g, 4.30 mmol) in tetrahydrofuran (10 mL) was added dropwise at -78 C. After the addition was complete, the cooling bath was removed. The reaction mixture was stirred for 3 h at ambient temperature and saturated aqueous ammonium chloride (10 mL) was added. The mixture was extracted with ethyl acetate (2 x 30 mL). The organic layer was washed with water and brine, dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo and the residue was purified by column chromatography eluting with 30% ethyl acetate in hexanes to afford A/-(2,4-dimethoxybenzyl)-2,4,5-trifluoro-A/-(3-methyl- 1 ,2,4-thiadiazol-5-y)benzenesulfonamide in 42% yield (0.83 g) as a colorless solid: MS (ES+) m/z 459.8 (M + 1).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; XENON PHARMACEUTICALS INC.; SUN, Shaoyi; ZENOVA, Alla, Yurevna; CHAFEEV, Mikhail; JIA, Qi; ZHANG, Zaihui; OBALLA, Renata, Marcella; WO2013/64983; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, molecular formula is C6H2ClF3O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 220227-21-4

A solution of ferf-butyl thiazol-4-ylcarbamate (3.46 g, 17.3 mmol) in tetrahydrofuran (150 mL) at -78 C was treated with lithium 6/’s(trimethylsilyl)amide (1.0 M solution in tetrahydrofuran, 20.8 mL, 20.8 mmol). The resulting mixture was stirred at -78 C for 0.5 h, allowed to warm to ambient temperature and stirred for a further 0.5 h. The reaction mixture was cooled to -78 C and treated with a solution of 2,4,5- trifluorobenzene-1-sulfonyl chloride (3.99 g, 17.3 mmol) in tetrahydrofuran (30 mL). The resulting mixture was stirred at -78 C for 4 h, allowed to warm to ambient temperature and stirred for a further 16 h. The reaction mixture was diluted with ethyl acetate (300 mL) and washed with saturated aqueous ammonium chloride (2 x 150 mL) and brine (2 x 150 mL), dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The residue was purified by column chromatography eluting with a gradient of ethyl acetate in hexanes to afford terf-butyl thiazol-4-yl((2,4,5- trifluorophenyl)sulfonyl)carbamate as a beige solid in 62% yield (4.23 g): 1H NMR (300 MHz, CDCI3) 6 8.79-8.75 (m, 1 H), 8.06-7.96 (m, 1 H), 7.53-7.48 (m, 1H), 7.15-7.04 (m, 1 H), 1.34 (s, 9H); MS (ES+) m/z 394.7 (M + 1).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 220227-21-4, its application will become more common.

Reference:
Patent; XENON PHARMACEUTICALS INC.; LIU, Shifeng; FOCKEN, Thilo; CHAHAL, Navjot; ZHANG, Zaihui; OBALLA, Renata, Marcella; FONAREV, Julia; WO2013/64984; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 220227-21-4,Some common heterocyclic compound, 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, molecular formula is C6H2ClF3O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesis of N-{5-[l-(2,4-Dichloro-benzyl)-5-fluoro-3-methyl-lH-indol-7-yl]- [l,3,4]oxadiazol-2-yl}-2,4,5-trifluoro-benzenesulfonamide, B12. A solution of 2,4,5-trifluorobenzenesulfonyl chloride (92 mg, 0.4 mmol, 4 equiv.) in pyridine (0.3 mL) was added to a mixture of 1-14 (39 mg, 0.1 mmol, 1 equiv.) and DMAP (49 mg, 0.4 mmol, 4 equiv.) at rt. The reaction mixture was heated to 90 0C for 2 h. The reaction mixture was then quenched with 10% aqueous HCl and extracted with ethyl acetate. The organic layer was washed with water, brine, dried over MgSO4, filtered, and concentrated in vacuo. The resulting oil was chromatographed on SiO2 (0.5 g), eluting with CH2Cl2 to afford B12 (10 mg, 17 %) as a yellow oil. Rf= 0.40 (EtOAc). 1H-NMR (400 MHz, CDCl3) 2.34 (d, J =1.2 Hz, 3H), 5.64 (s, 2H), 6.05 (d, J = 8.4 Hz, IH), 6.97 (dd, J = 8.4, 2.0 Hz, IH),7.03 (s, IH), 7.08 (m, IH), 7.29 (dd, J = 9.6, 2.4 Hz, IH), 7.35 (d, J = 2.0 Hz, IH), 7.51 (dd, J = 8.4, 2.4 Hz, IH), 7.86 (m, IH). LC-MS (95 %): ESI” Calcd. 586 (M) Found: 585.1 (M-I).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,4,5-Trifluorobenzene-1-sulfonyl chloride, its application will become more common.

Reference:
Patent; DECODE CHEMISTRY, INC.; WO2006/44405; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, A new synthetic method of this compound is introduced below., Computed Properties of C6H2ClF3O2S

General procedure: To a solution of 500 mg of 6-(4-amino-phenyl)-1H-pyrazolo[3,4-b]pyrazin-3-ylamine hydrochloride and 397 mg of 2-fluoro-5-methyl-benzenesulfonyl chloride in 4 ml DCM, 0.16 ml pyridine were added and the reaction mixture was stirred for 16 h at RT. Then, the solvents were removed under reduced pressure and the crude product was purified by chromatography on silica gel eluting with a gradient of n-heptane/EtOAc. The fractions containing the product were combined and the solvent evaporated under reduced pressure. The title compound was prepared by adapting the procedures described in example 19, employing 2,4,5-trifluoro-benzenesulfonyl chloride instead of 2-fluoro-5-methyl-benzenesulfonyl chloride. MS (ES+): m/e = 421.1 (M+H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SANOFI; Nazare, Marc; Halland, Nis; Schmidt, Friedemann; Weiss, Thilo; Hofmeister, Armin; EP2570415; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 220227-21-4, name is 2,4,5-Trifluorobenzene-1-sulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 220227-21-4, category: chlorides-buliding-blocks

[00373] Step A: To a solution of sodium sulfite (153 g, 1214 mmol) in water (1000 mL) was added a solution of 2,4,5-trifluorobenzene-l-sulfonyl chloride (40 g, 173 mmol) in dioxane (300 mL) dropwise. After the complete addition of sulfonyl chloride, the reaction was basified to about pH 14 by the addition of 1 N NaOH, and the reaction mixture was stirred overnight. The reaction mixture was cooled on an ice bath and acidified using 100 mL concentrated H2SO4 to about pH 1. The mixture was extracted with EtOAc and CH2CI2 and the combined organic layers were dried over a2S04, filtered and concentrated to afford 2,4,5-trifluorobenzenesulfinic acid (34 g, 100%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4,5-Trifluorobenzene-1-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARRAY BIOPHARMA INC.; AICHER, Thomas Daniel; BENCSIK, Josef R.; BOYD, Steven Armen; CONDROSKI, Kevin Ronald; FELL, Jay Bradford; FISCHER, John P.; HINKLIN, Ronald Jay; PRATT, Scott Alan; SINGH, Ajay; TURNER, Timothy M.; WO2012/37393; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics