Category: 22519-64-8

Liu, Zhenhua; Huang, Jinyu; Wang, Quan; Zhou, Jiaxi; Ye, Jiexiong; Li, Xuejin; Geng, Youfu; Liang, Zhiqiang; Du, Yu; Tian, Xiaoqing published the artcile< Indium oxide-black phosphorus composites for ultrasensitive nitrogen dioxide sensing at room temperature>, Related Products of 22519-64-8, the main research area is indium oxide black phosphorus composite ultrasensitive nitrogen dioxide sensing.

In2O3 nanorods were successfully incorporated by different amount of multi-layer black phosphorus (m-BP), forming the hetero-structured BP-In2O3 composites. The structure, morphol. and composition of the as-synthesized composites were characterized by X-ray diffraction (XRD), field-emission electron microscopy (FESEM), transmission electron microscopy (TEM) and XPS. Interestingly, the environmental stability of BP can be notably improved by the introduction of In2O3. Moreover, NO2 sensing properties of BP-In2O3 composites were tested at room temperature (25°C) with relative humidity of 30%. It is demonstrated that the sensor based on BP-In2O3 composites exhibits high response, lower detect limit, short response-recovery time and outstanding selectivity at room temperature Such sensing behavior can be attributed to high adsorption capacity to NO2, large surface area, excellent carrier mobility of BP-In2O3 in presence of BP, as well as high concentration of chemisorbed oxygen on the In2O3 surface derived from electrons transfer from BP to In2O3.

Sensors and Actuators, B: Chemical published new progress about Adsorption. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Related Products of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Ding, Yao; Wei, Dingqiong; He, Rong; Yuan, Rusheng; Xie, Tengfeng; Li, Zhaohui published the artcile< Rational design of Z-scheme PtS-ZnIn2S4/WO3-MnO2 for overall photo-catalytic water splitting under visible light>, Synthetic Route of 22519-64-8, the main research area is platinum zinc indium sulfide manganese oxide photocatalytic water splitting.

ZnIn2S4/WO3 nanocomposites, with ZnIn2S4 nanosheets loaded on WO3 nanorods, were synthesized by self-assembly of hexagonal ZnIn2S4 in the presence of preformed WO3·H2O nanoplates. PtS and MnO2, the co-catalysts for H2 and O2 evolution, resp., were selectively loaded on ZnIn2S4 and WO3 in the nanocomposites. The resultant PtS-ZnIn2S4/WO3-MnO2 nanocomposites show photocatalytic activity for overall water splitting to produce H2 and O2 under visible light. An optimum activity was achieved over 0.5%PtS-20%ZnIn2S4/WO3-3.0%MnO2, in which 5.94 μmol of H2 and 2.24 μmol O2 were evolved in 8 h. The apparent quantum yield (AQY) for H2 evolution was determined to be ca. 0.50% at 420 nm. The superior photocatalytic activity for overall water splitting over PtS-ZnIn2S4/WO3-MnO2 nanocomposites can be ascribed to an efficient coupling of photocatalytic water reduction over PtS-ZnIn2S4 and photocatalytic water oxidation over MnO2-WO3 via a Z-scheme charge transfer pathway. This study demonstrates a high potential of fabrication of the all-solid Z-scheme photocatalytic systems for overall water splitting.

Applied Catalysis, B: Environmental published new progress about Current density. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Synthetic Route of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Wang, Peng; Zhou, Xibin; Shao, Yu; Li, Danzhen; Zuo, Zhongfu; Liu, Xuezheng published the artcile< CdS quantum dots-decorated InOOH: Facile synthesis and excellent photocatalytic activity under visible light>, Related Products of 22519-64-8, the main research area is cadmium sulfide quantum dot indium oxyhydroxide photocatalyst visible light; CdS quantum dots; InOOH; Nitro aromatics; Photocatalytic reduction; Visible light.

For the first time, CdS quantum dots (QDs)-decorated InOOH (CdS-In for short) was synthesized by a facile photodeposition method. The experiment results showed that CdS-In samples exhibited excellent activity and stability towards photocatalytic reduction of nitro aromatics The conversion ratio of 4-nitroaniline (4-NA) over CdS-In sample that was prepared with photodeposition time of 120 min (CdS-In-120) reached up to 99.4% under visible light irradiation for 40 min, which was even higher than that achieved over com. CdS (86.2%). Besides the significant enhancement of visible light absorption, quantum sized CdS were decorated evenly on the surface of InOOH, which was very beneficial for the high activity. Furthermore, the heterogeneous junction formed at the interface of CdS QDs and InOOH can significantly increase the separation efficiency of photogenerated charge carriers. Active species control experiment and ESR (ESR) technique have proved that photogenerated electrons are the main active species towards photocatalytic reduction of nitro aromatics It is anticipated that our study would offer meaningful insights for exploring novel InOOH-based visible light photocatalysts towards efficient reduction of nitro aromatics

Journal of Colloid and Interface Science published new progress about Crystallinity. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Related Products of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Yan, Wei; Xu, Yangyang; Hao, Shengwei; He, Zhengdong; Wang, Lele; Wei, Qingyuan; Xu, Jing; Tang, Hua published the artcile< Promoting charge separation in hollow-structured C/MoS2@ZnIn2S4/Co3O4 photocatalysts via double heterojunctions for enhanced photocatalytic hydrogen evolution>, Safety of Indium(III) chloride tetrahydrate, the main research area is hollow structured double heterojunction hydrogen evolution reaction catalyst.

A reasonable design of samples with efficient spatial separation for photoinduced electron-hole pairs toward the photocatalytic hydrogen evolution reaction (HER) has gained significant attention. Herein, a new C/MoS2@ZnIn2S4/Co3O4 composite with a core-shell structure is designed toward photocatalytic hydrogen production on C/MoS2 and Co3O4 dual electron collectors. Co3O4 nanoparticles as the co-catalyst would form a Schottky junction with ZnIn2S4 nanosheets while the C/MoS2 hollow core would form the step-scheme (S-scheme) heterojunction with ZnIn2S4 sheets, which provides a dual photogenerated electron transfer pathway during the light irradiation process. In addition, the unique core-shell architecture offers large contact interfaces favoring the exposure of rich active sites, which facilitated the separation and the transfer of charges. Consequently, all these factors endowed the C/MoS2@ZnIn2S4/Co3O4 composite with enhanced light absorption ability and an increased hydrogen evolution rate of 6.7 mmol·g-1·h-1 under 420 nm light irradiation, which is about 23.4- and 4.5-fold that of ZnIn2S4 and CMZ, resp. This work offers a guideline for designing efficient composite photocatalysts toward the photocatalytic HER.

Inorganic Chemistry published new progress about Charge separation. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Safety of Indium(III) chloride tetrahydrate.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Zhao, Bin; Lu, Yafei; Yuan, Boheng; Wang, Zhenyu; Han, Xiaogang published the artcile< Preparation of free-standing Li3InCl6 solid electrolytes film with infiltration-method enable roll-to-roll manufacture>, Product Details of Cl3H8InO4, the main research area is lithium indium chlorine glass fiber secondary battery electrolyte.

All-solid-state Li batteries (ASSLBs) have attracted more and more attention due to their potential energy d. and safety benefits. For practical application, searching for a preparation method of solid-state electrolyte that is compatible with mature Li-ion-batteries technologies and enable scale-up production is important. In this work, an infiltration method is proposed for the preparation of Li3InCl6/glass-fiber solid composite electrolyte (LIC-SCE) film. Roll pressing method is adopted to obtain compact LIC-SCE with good mech. strength, showing great promising to roll-to-roll manufacture platform. The LIC-SCE shows a high ionic conductivity of 5.4×10-4 S cm-1 at room temperature Further, ASSLBs are successfully assembled with LiCoO2 (LCO) cathode.

Materials Letters published new progress about Activation energy. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Product Details of Cl3H8InO4.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Ding, Su-Ying; Yu, Si-Qi; Wang, Xiao-Xia; Wu, Zi-Hua; Li, Wen-Qin; Jia, Wei; Xie, Hua-Qing published the artcile< Fabrication of buffer-window layer system for Cu(ln, Ga)Se2 thin film devices by chemical bath deposition and Sol-Gel methods>, HPLC of Formula: 22519-64-8, the main research area is fabrication buffer window layer system copper indium gallium selenium; thin film device chem bath deposition Soluble gel method.

Recently, nontoxic fabrication for Cu(ln, Ga)Se2 thin films gained increasing popularity. In this work, chem. bath deposition and Sol-gel methods were utilized in the fabrication of an environmentally buffer-window (ZnS-ZnO/ZnO:AI) layer system for Cu(ln, Ga)Se2 thin film devices. The influences of conditions like annealing temperature, coating times, and Al-doping amount were investigated. The surface morphol. and optical properties illustrated a compact and uniform ZnS film with a band-gap of 3.78, which can be a good alternative to CdS film. Resistivity of 0.35 ω.cm for the ZnO/ZnO:AI film was achieved by the ideal condition of 9 coating times and 5 Al-doping amounts A cross-sectional view of the complete Cu(ln, Ga)Se2 thin film was obtained, and the structure status was analyzed.

Journal of Nanoelectronics and Optoelectronics published new progress about Absorbents. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, HPLC of Formula: 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Jiang, Xiaoqing; Wu, Hongping; Yu, Hongwei; Hu, Zhanggui; Wang, Jiyang; Wu, Yicheng published the artcile< Metal halide In(Ba3Cl3F6) - a novel infrared-transparent molecular sieve constructed by halides>, Name: Indium(III) chloride tetrahydrate, the main research area is metal halide manufacture barium indium chloride fluoride mol sieve.

Mol. sieves are of increasing importance in catalysis, the oil industry, and biomedicine. Traditional mol. sieves are generally oxides that inevitably show some absorption in the mid- and far-IR range due to the vibrations of metal-oxygen bonds, which are unfavorable for the in situ observation of the reactions in mol. sieves through IR techniques. In this study, a new metal halide In[Ba3Cl3F6] has been synthesized. It exhibits a quite transparent window from 0.366 to 22 μm and good adsorption and desorption processes.

Chemical Communications (Cambridge, United Kingdom) published new progress about Halides Role: IMF (Industrial Manufacture), PREP (Preparation). 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Name: Indium(III) chloride tetrahydrate.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Li, Zengxing; Ng, Kim Hoong; Xu, Shen; Zhang, Yingzhen; Lei, Yonggang; Huang, Jianying; Lai, Yuekun published the artcile< Facile preparation of tremella-like TiO2/Cd:ZnIn2S4 photoanode with enhanced photo-electro-chemical (PEC) performance for energy and environmental applications>, Recommanded Product: Indium(III) chloride tetrahydrate, the main research area is titanium oxide cadmium zinc indium sulfate nanocomposite photoanode; Photoanode; Photoelectrochemical; TiO(2) nanotubes; ZnIn(2)S(4).

The realization of solar-driven photoelectrochem. (PEC) process lies in the success development of materials with excellent photoelec. properties. Past reports identified TiO2, upon modified with both Cd and ZnIn2S4 (ZIS), exhibits promising PEC performance; however, at the cost of tedious preparation In view of this, our work proposes a facile one-step hydrothermal strategy to deposit both modifiers onto the pre-obtained TiO2 nanotubes (NTs), realizing rose-like TiO2/ZnIn2S4 (TiO2/ZIS) or tremella-like TiO2/Cd:ZnIn2S4 (TiO2/Cd:ZIS) with improved PEC performances. Interestingly, the thickness of ZIS petals, which deposited on top of TiO2 NTs, is pos.-correlated to its Cd-composition, signifying the substitutional doping of Cd into the unit cell of ZIS. This renders robust ionic interactions between the constituents, prompting the enhanced optical properties of TiO2 in conjecture to its reduced impedance. As a result, the recombination rate of photo-elec.-derived carriers was drastically suppressed, with an improved photocurrent d. of 606.2μA cm-2 recorded by TiO2/Cd:ZIS photoanode under solar irradiation Such performance is 80 times and 5.16 times higher than those of bare TiO2 NTs and TiO2/ZIS counterparts. The photoconversion efficiencies in terms of incident photon-to-current conversion efficiency (IPCE) and applied bias photon current efficiency (ABPE) for TiO2/Cd:ZIS were significantly improved too, recorded at 1.12% and 0.38%, resp., under standard evaluation condition. As summary, our work proposes a facile one-step hydrothermal approach that simultaneously-deposit both Cd and ZIS onto TiO2 photoanode for an enhanced PEC performance. This opens up a wider horizon for PEC technol., further unlocking its potential in both energy and environmental applications.

Chemosphere published new progress about Crystallinity. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Recommanded Product: Indium(III) chloride tetrahydrate.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

El Nady, Jehan; Ali, Magdy; Kamel, Ola A.; Ebrahim, Shaker; Soliman, Moataz published the artcile< Room temperature synthesis of aqueous ZnCuInS/ZnS quantum dots>, Electric Literature of 22519-64-8, the main research area is zinc sulfide quantum dot room temperature.

In this work a new method was developed for synthesis of aqueous cadmium-free, CuInS (CIS) quantum dots (QDs) at room temperature CIS QDs as cores were alloyed with 25% of Zn2+ ions at room temperature and followed by the growth of ZnS shell to form CIS and ZCIS QDs. X-ray diffraction (XRD) anal. confirmed that the ZCIS QDs have a wurtzite structure. Moreover, the energy-dispersive X-ray (EDX) anal. demonstrated that ZCIS QDs are composed of Cu, In, Zn and S elements. It was found that Zn ions introduced into CIS QDs lattice structure did not change in the crystal structure. ZCIS/ZnS QDs showed high photoluminescence (PL) peak and its position and intensity depend on the Cu:In ratio. High resolution transmission electron microscope (HRTEM) images showed that ZCIS and ZCIS/ZnS QDs have a spherical shape with average diameter sizes of 4.0 nm and 7.0 nm, resp. The selected area electron diffraction (SAED) suggested that the prepared ZCIS QDs are crystalline with an interplanar distance of 0.320 nm.

Journal of Dispersion Science and Technology published new progress about Crystal growth. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Electric Literature of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Xu, Yan; Wang, Zhenbo; Ding, Caifeng; Luo, Xiliang published the artcile< Ratiometric antifouling electrochemiluminescence biosensor based on bi-functional peptides and low toxic quantum dots>, Recommanded Product: Indium(III) chloride tetrahydrate, the main research area is quantum dot peptide antifouling electrochemiluminescence biosensor.

It is a great challenge to detect the target selectively and accurately in complex biol. samples. A ratiometric signal amplification strategy based on antifouling peptide is proposed to detect thrombin (TB) in this work. The electrode is modified with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and Au@Luminol. Then the bi-functional peptide anchors to the modified electrode and captures the low toxic electrochemiluminescence (ECL) probe. The bi-functional peptide includes a new antifouling sequence (DRDRDRDR) and a TB recognizable sequence (SGRPVLG), while the former can greatly reduce the non-specific adsorption in complex samples and the latter can be cleaved by TB. The new self-enhanced luminescence probe labeled as PAMAM-QDs is composed of low toxic and water-soluble CuInZnS/ZnS quantum dots (CIZS/ZnS QDs) and polyamidoamine (PAMAM) via amide bonds. Concentration of TB can be obtained via the ratio of the signals of ECLQDs/ECLAu@Luminol accurately and sensitively. The ECL biosensor with the detection line 1.82 fM can work from 10 fM to 1 nM. Thanks to the antifouling property of the designed peptide and the amplification of the new ECL probe, the biosensor can be used for quantifying TB in practical complex samples with high selectivity and sensitivity.

Sensors and Actuators, B: Chemical published new progress about Bioelectric current, current-potential relationship. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Recommanded Product: Indium(III) chloride tetrahydrate.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics