Category: 22519-64-8

Jiang, Deli; Zhang, Qianxiao; Chen, Donghai; Wen, Baowei; Song, Qi; Zhou, Changjian; Li, Di published the artcile< Calcium potassium niobium oxide/ indium zinc sulfide nanosheet heterojunctions with improved charge separation efficiency for efficient photocatalytic carbon dioxide reduction>, Related Products of 22519-64-8, the main research area is carbon dioxide photocatalytic reduction nanosheet.

Construction of heterojunctions with face-to-face contact is an excellent strategy for highly efficient photocatalytic CO2 reduction system. Herein, ZnIn2S4/KCa2Nb3O10(ZnIn2S4/KCNO) 2D/2D nanosheet heterojunctions are fabricated via an in-situ solution-processed method, and the optimal 20%-ZnIn2S4/KCNO heterojunction shows a significantly enhanced photocatalytic activity with the CO production rate of 4.69 μmol g-1 h-1, which is about 12.31 and 1.95 times higher than that of bare ZnIn2S4 and KCa2Nb3O10 under simulated sunlight irradiation The as-prepared ZnIn2S4/KCNO nanosheet heterojunctions exhibit tremendously improved charge transfer and separation efficiency. The ultrathin structure KCNO is conducive to the rapid transmission of photogenerated electrons, while the nanoflower-like structure ZnIn2S4 is conducive to the full contact with the reactants to produce more protons, resulting in significantly boosted CO production performance. This work gives a new strategy to construct 2D/2D nanosheet heterojunctions for photocatalytic CO2 conversion, which can offer significant inspirations for other 2D hybrid systems.

Journal of Alloys and Compounds published new progress about Binding energy. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Related Products of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Zhou, Miao; Liu, Zhihua; Song, Qinggong; Li, Xifei; Chen, Bowen; Liu, Zhifeng published the artcile< Hybrid 0D/2D edamame shaped ZnIn2S4 photoanode modified by Co-Pi and Pt for charge management towards efficient photoelectrochemical water splitting>, Related Products of 22519-64-8, the main research area is zinc indium sulfide cobalt phosphate platinum photoanode; zinc indium sulfide photoelectrochem water splitting.

Charge separation and transport as well as light absorption are pivotal in determining the efficiency of solar water splitting devices. Herein, we have designed a novel edamame shaped ZnIn2S4 nanostructures consisted of hybridized nanoflakes (2D) and nanoparticles (0D) on ITO conductive substrate through a simple hydrothermal method for PEC water splitting for the first time. The growth mechanism of 0D/2D ZnIn2S4 is proposed and discussed in detail. The series of PEC measurements indicate that edamame shaped 0D/2D ZnIn2S4 films exhibit relatively higher PEC activity (0.37 mA/cm2 at 1.23 V vs. RHE) than that of ZnIn2S4 NFs and ZnIn2S4 NPs due to the enhanced light absorption and efficient charge separation and transfer and increased active sites. Addnl., after selectively depositing Co-Pi cocatalyst and Pt NPs on the top and bottom sides of edamame shaped ZnIn2S4 photoanodes, charge recombination at the surface and interface can be efficiently reduced. The spatial Co-Pi cocatalyst drives holes to flow to the surface, while the Pt NPs facilitate the electrons in the opposite directions. Thus, the integrated Co-Pi/ZnIn2S4/Pt equipment without any addnl. doping presents an increased photocurrent d. with 0.91 mA/cm2 at 1.23 V vs. RHE. This work highlights that edamame shaped ZnIn2S4 can be a promising candidate for photoelectrochem. behavior and rout such as coupling of Co-Pi and Pt co-catalysts on photoanodes have an interfacial elec. field can provide a new avenues to design efficient PEC devices in future.

Applied Catalysis, B: Environmental published new progress about Catalysts. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Related Products of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Shen, Chun-Hui; Chen, Yao; Xu, Xin-Jie; Li, Xue-Yang; Wen, Xiao-Ju; Liu, Zong-Tang; Xing, Rong; Guo, He; Fei, Zheng-Hao published the artcile< Efficient photocatalytic H2 evolution and Cr(VI) reduction under visible light using a novel Z-scheme SnIn4S8/CeO2 heterojunction photocatalysts>, Synthetic Route of 22519-64-8, the main research area is hydrogen chromium tin indium sulfide cerium oxide photocatalyst photocatalysis; Cr(VI) reduction; H(2) production; SnIn(4)S(8)/CeO(2); Z-scheme.

Semiconductor photocatalysis technol. is a promising method for hydrogen production and water pollution treatment. Here, the SnIn4S8/CeO2 (SISC) composites were fabricated by a stirring and calcination method, and the mass ratio of SnIn4S8 to CeO2 was optimized. The 50 wt% SISC heterojunction photocatalyst has the highest visible light catalytic activity. The degradation rate of hexavalent chromium (Cr (VI)) is 98.8% in 75 min of light irradiation, which is 2.48 times that of pure CeO2. Besides, the 50 wt% SISC composite photocatalyst also has the highest photocatalytic hydrogen production efficiency (0.6193 mmol g-1 h-1), which exhibits a higher photocatalytic activity than pure CeO2 and SnIn4S8. The enhanced photocatalytic performance can be attributed to the Z-scheme heterojunction structure between CeO2 and SnIn4S8, which can effectively sep. and transfer photo-generated charges, thereby reducing the recombination of photo-generated carriers. We hope this work can provide ideas for constructing Z-scheme heterojunction structures and improving photocatalytic activity under visible light.

Journal of Hazardous Materials published new progress about Band gap. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Synthetic Route of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Ning, Hui; Fei, Xiang; Tan, Zhonghao; Wang, Wenhang; Yang, Zhongxue; Wu, Mingbo published the artcile< In situ-fabricated In2S3-reduced graphene oxide nanosheet composites for enhanced CO2 electroreduction to formate>, Product Details of Cl3H8InO4, the main research area is indium trisulfide reduced graphene oxide nanosheet composite; electrochem reduction catalyst.

The use of renewable electricity to catalyze carbon dioxide reduction is a promising method for CO2 utilization. However, the lack of highly efficient catalysts for CO2 reduction seriously limits its industrial applications. As a prototype, an ultrathin indium sulfide nanosheet (In2S3 NS) was synthesized and fabricated in situ on reduced graphene oxide (RGO) to obtain an In2S3-RGO composite. Induced by the two-dimensional (2D) structure of graphene oxide, the thickness of the In2S3 NSs was reduced from 30.2 to 3.9 nm. Simultaneously, the (440) plane of In2S3 NSs was preferentially grown parallel to the graphene plane, which was proven to possess a higher selectivity in catalyzing CO2 electroreduction to formate than the (111) and (311) planes by d. functional theory calculations Attributed to the 2D structure and full exposure of the (440) planes, a large electrochem. active surface area and high d. of optimum active sites were both realized on the In2S3-RGO hybrids, leading to 91% faradaic efficiency of formate at -1.2 V vs. The reversible hydrogen electrode in 0.1 M KHCO3 is 3.5 times that of bulk In2S3 (26%). Our work provides an effective way to prepare 2D transition metal catalysts with controllable crystal face exposure for specific reactions.

ACS Applied Nano Materials published new progress about Density functional theory. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Product Details of Cl3H8InO4.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Zhou, Ming; Yao, Yu; Han, Yutong; Xie, Lili; Zhao, Xueling; Barsan, Nicolae; Zhu, Zhigang published the artcile< Ultrasensitive gas sensor based on nanocube In2O3-CNH composite at low operating temperature>, Product Details of Cl3H8InO4, the main research area is Indium oxide carbon nanohorn composite ultrasensitive gas sensor.

A facile solvothermal route prepared In2O3/CNH nanocomposites with different CNH concentrations All nanocomposites’ structural and morphol. properties were investigated by XRD, FESEM, TEM, XPS, and BET. The H2S sensing performance of the sensors based on them was tested, operated between 40°C and 300°C. The results showed that the optimal composition is In2O3/CNH (2 wt%) with a sensor signal to 2 ppm H2S, at an operating temperature of 70°C, of almost 3000. The sensors demonstrated excellent selectivity, low impact of humidity and good reproducibility and stability. The superior sensor performance is related to the p-n junction formation between the CNH and In2O3, which determines the increase of the surface band bending and the sensor response. The gas sensing mechanism is thoroughly discussed, and the In2O3/CNH nanocomposite sensor can be considered an ideal candidate for high-performance detection of H2S with low-power consumption.

Sensors and Actuators, B: Chemical published new progress about Band structure. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Product Details of Cl3H8InO4.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Jiang, Yansong; Lu, Zijing; Wang, Pengcheng; Xu, Jianing; Wang, Li; Fan, Yong published the artcile< Immobilized dyes within anionic indium coordination polymer for photocatalytic 1O2 generation>, Product Details of Cl3H8InO4, the main research area is immobilized dye anionic indium coordination polymer photocatalytic singlet oxygen.

A new anionic indium coordination polymer, (Me2NH2)[In(OH-BDC)2]·H2O (1), has been designed and synthesized under solvothermal conditions based on organic ligand 5-hydroxyisophthalic acid. 1 exhibits a 2D layered structure with rhombic windows, which is stacked to form 3D supramol. network by the π-π stacking interactions of Ph rings of ligand in adjacent layers. It not only shows excellent resistance to acid or basic conditions but also has good tolerance to various common solvents. Moreover, due to the neg. charge of the host framework, it shows remarkable selective adsorption for pos. charge dyes such as methylene blue (MB), rhodamine B (RhB) and crystal violet (CV), and the removal rates are higher than 90%. In particular, the adsorption capability of 1 to RhB is higher than most CPs based adsorbents. In addition, MB@1 is a high-efficiency reactive oxygen species (ROS) producer with good photocatalytic activity for the oxidation of 1,5-dihydroxynaphthalene (1,5-DHN) and can be recycled five times without loss of activity. To our knowledge, it is the first time that dye@CP was used for ROS production and photooxidation of 1,5-DHN.

Microporous and Mesoporous Materials published new progress about Adsorption. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Product Details of Cl3H8InO4.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Wei, Chang; Wei, Xian; Hu, Zhe; Yang, Dan; Mei, Shiliang; Zhang, Guilin; Su, Danlu; Zhang, Wanlu; Guo, Ruiqian published the artcile< A fluorescent probe for Cd2+ detection based on the aggregation-induced emission enhancement of aqueous Zn-Ag-In-S quantum dots>, Quality Control of 22519-64-8, the main research area is zinc silver indium sulfur quantum dot fluorescent probe cadmium.

A sensitive and selective fluorescent probe for the cadmium ion (Cd2+) was developed based on the aggregation-induced emission enhancement (AIEE) of Zn-Ag-In-S quantum dots (ZAIS QDs). The QDs were synthesized by a convenient hydrothermal method with L-cysteine as ligands, with the average size of 3.2 nm and the emission peak at 520 nm. The interference study indicated the good selectivity of the probe. It has a broad detection range from 25μM to 2 mM and the detection limit is 1.56μM. AIEE is triggered by the interaction between Cd2+ and thiol groups on the surface of QDs, which causes weaker electrostatic repulsion between QDs and the passivation of surface defects. To the best of our knowledge, this is the first report on the AIEE of quaternary QDs. The method was successfully applied to the determination of Cd2+ in water samples with recoveries between 98.1% and 103.3%. This work shows its potential as a candidate for Cd2+ detection and provides a new understanding of AIEE.

Analytical Methods published new progress about Absorption. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Quality Control of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Jiang, Zhongyong; Li, Kun; Cai, Xiaoyan; Chubenko, Eugene; Bondarenko, Vitaly; Mao, Liang; Zhao, Yulong; Gu, Xiuquan published the artcile< Enhanced performance of FeOOH/ZnIn2S4/Au nanosheet arrays for visible light water splitting>, Computed Properties of 22519-64-8, the main research area is iron oxyhydroxide zinc indium sulfide gold nanosheet water splitting.

Carrier separation, charge transport, and visible light absorption are the main factors affecting the solar water splitting performance of a semiconductor photoanode. In this work, ZnIn2S4 (ZIS) nanosheet arrays (NSAs) were prepared by a hydrothermal route on a transparent fluorine-doped tin oxide (FTO) substrate, which was followed by a modification with an amorphous FeOOH thin layer. The surface morphol. of ZIS NSAs was shown not to change regardless of whether Au was used as the seeding layer. Besides, the effect of the FeSO4 solution concentration on the morphol., optical absorption, and photoelectrochem. (PEC) performance was investigated. The PEC measurements showed that at the 1.23 V bias relative to RHE (VRHE), the FeOOH/ZIS/Au optical photoanodes exhibited a 4.5 and 1.9 times higher photocurrent d. than the ZIS/FTO and ZIS/Au/FTO electrodes, resp. For the 0.05Fe/ZIS/Au/FTO samples, the 0.91 mA cm-2 initial photocurrent d. was achieved at VRHE of 1.23 V. The FeOOH/Au/ZIS photoanodes also displayed a maximum H2 yield amount of 26.2μmol cm-2 h-1. It was also observed that the enhanced PEC performance may be resulted from the synergistic effect of the FeOOH top decoration and Au under layer. Specifically, FeOOH facilitated the hole injection into the electrolyte, while Au NPs provided a number of sinks for the electron transport to the FTO substrates.

Journal of Materials Science: Materials in Electronics published new progress about Band gap. 22519-64-8 belongs to class chlorides-buliding-blocks, and the molecular formula is Cl3H8InO4, Computed Properties of 22519-64-8.

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics