Category: 2770-11-8

Adding a certain compound to certain chemical reactions, such as: 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2770-11-8, Product Details of 2770-11-8

General procedure: To a stirred and cooled solution of 2-(4-chlorophenoxy)aniline (330 mg, 1.50 mmol) and triethylamine (230 muL, 1.65 mmol) in toluene (5 mL), the appropriate acid chloride (pivaloyl chloride, 2,2-dimethylbutyryl chloride, 3-methylbutyryl chloride, propyl chloride, cyclopropanecarbonyl chloride, cyclobutanecarbonyl chloride, methyl succinyl chloride, 4-methoxybenzoyl chloride) (1.65 mmol) was added. Subsequently the reaction mixture was allowed to warm to room temperature. The progress of the reaction was monitored by TLC. After 2-9 h the reaction mixture was extracted with a saturated sodium hydrogen carbonate solution, with a hydrogen chloride solution (10%), with brine and finally with water. Afterwards the organic solution was dried over sodium sulfate and evaporated under reduced pressure. The residue was further purified by recrystallization or column chromatography over silica gel.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Weidner, Thomas; Nasereddin, Abed; Preu, Lutz; Gruenefeld, Johann; Dzikowski, Ron; Kunick, Conrad; Molecules; vol. 21; 2; (2016);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 2770-11-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 2770-11-8 name is 2-(4-Chlorophenoxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4-[2-(4-Chlorophenoxy)phenylcarbamoyI]piperidine-l-carboxylic acid fer/-butyl ester (AMR01031) C23H27ClN2O4, MW 430,92A solution of piperidine-l,4-dicarboxylic acid mono-tert-butyl ester (AMRO 1030, 417 mg, 1.82 mmol) in dry DCM (8 mL) was stirred under nitrogen, and 4- dimethylaminopyridine (DMPA, 40 mg, 0.327 mmol), (l-(3-dimemylaminopropyl)-3- ethylcarbodiimide hydrochloride (EDC, 1.05 g, 5.46 mmol) and triethylamine (0.25 mL) were added. The resulting mixture was stirred for 30 min under nitrogen and 2-(4-chloro- phenoxy)-phenylamine (AMR01029, 400 mg, 1.82 mmol) in dry DCM (4 mL) was added. After stirring at room temperature for 24 h, the mixture was diluted with DCM, washed EPO with HCl IM (3 x 25 mL), water, saturated NaHCO3 (2 x 25 mL) and brine. The organic layer was dried (MgSO4), filtered and evaporated. Flash chromatography on silica gel of the crude product using hexane/EtOAc 8:2 as eluent gave starting material (104 mg). Further elution using hexane/EtOAc 7:3 gave 4-[2-(4-chlorophenoxy)- phenylcarbamoyl]piperidine-l-carboxylic acid tert-butyl ester (430 mg, 55%) as a white solid, mp 97-99 0C. Rf: 0.22 (hexane/EtOAc 7:3) LC/MS (APCI) tr = 3.83 min, m/z 431.23 (33), 429.21 (M’-H,100). 1H NMR (270 MHz, CDCl3) ¡ê 1.44 (9H5 s, 3CH3), 1.68 (2H, m, CH2), 1.83 (2H, m, CH2), 2.36 (IH, tt, J= 11.4, 3.7 Hz), 2.75 (4 H, br t, 2CH2), 4.11 (4H, m, 2CH2), 6.81 (IH, dd, J= 8.2, 1.5 Hz, ArH), 6.93 (2H, AA’BB’, ArH), 7.01 (IH, td, ArH), 7.12 (IH, td, ArH), 7.31 (2H, AA’BB’, ArH), 7.68 (IH, br s, NH) and 8.40 (IH, dd, J= 6.9, 1.5 Hz, ArH).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(4-Chlorophenoxy)aniline, and friends who are interested can also refer to it.

Reference:
Patent; STERIX LIMITED; WO2007/3934; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2770-11-8,Some common heterocyclic compound, 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, molecular formula is C12H10ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of 1- {4- [2-(4-chIorophenoxy)phenylamino] -piperidin-1 -yl}-2- methylpropan-1-one STX1701 C21H25ClN2O2, MW: 372.8939To a solution of 2-(4-chlorophenoxy)phenylamine (100 mg3 0.45 mmol), l-isobutyryl-4- piperidone (144 mg, 0.735 mmol) and acetic acid (147 mg, 2.45 mmol) in DCE (1.5 ml) was added sodium triacetoxyborohydride (260 mg, 1.23 mmol). This solution was then heated at 1000C for 15 minutes in a CEM discover microwave (fixed hold time set to on).The reaction mixture was then quenched with saturated aqueous sodium bicarbonate solution (5 ml) and extraction with ethyl acetate (3 x 5 ml) followed. The combined organics were concentrated in vacuo and purification by flash chromatography proceeded(eluant: 8:2 hexane: ethyl acetate) to provide the title compound as a transparent oil (44 mg, 26%). 1HNMR (270 MHz, CDCl3): delta 1.10 (6H, d, J= 6.7 Hz, CH(CH3)2), 1.25-1.35(2H, m, 2 x CH), 2.03-2.27 (2H, m, 2 x CH), 2.76-2.85 (2H, m, 2 x CH)3 3.18 (IH, t, J=11.4 Hz, CH), 3.48-3.60 (IH, m, CH), 3.83-3.88 (IH, bd, J = 13.9 Hz3 CH)3 3.97-4.12 (IH, m, NH), 4.41-4.46 (IH, bd, J= 13.9 Hz, CH), 6.61-6.67 (IH, td, J- 1.2, 0.7, 7.7 Hz3 EPO ArH)5 6.74-6.77 (IH, dd, J= 1.2, 8.2 Hz, ArH), 6.79-6.82 (IH3 dd, J= 1.5, 7.9 Hz, ArH), 6.85-6.90 (2H, m, ArH), 7.01-7.07 (IH, td, J= 1.2, 0.8, 7.2 Hz, ArH), 7.20-7.25 ppm (2H, m, ArH). LCMS: M+R: 373.49 HPLC: 93.75% (2.692 min, isocratic 90% acetonitrile, 10% water at 1 ml/min).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(4-Chlorophenoxy)aniline, its application will become more common.

Reference:
Patent; STERIX LIMITED; WO2007/3934; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

2770-11-8,Some common heterocyclic compound, 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, molecular formula is C12H10ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a magnetically stirred solution of 2-(4-chlorophenoxy)aniline (95 mg, 0.432 mmol, 76 muL) in CH2Cl2 (1.5 mL) at room temperature was added dropwise propionylchloride (48 mg, 0.518 mmol, 45 muL) followed several minutes later by ethyldiisopropylamine (0.2 mL). The reaction was stirred at room temperature for a further 17 hours, quenched with H2O (10 mL) and partitioned with CH2Cl2 (10 mL). The aqueous layer was extracted with CH2Cl2 (10 mL), and the combined organic extracts were dried (Na2SO4), filtered and concentrated in vacuo. The residue was purified over silica gel with 0-50% ethyl acetate in cyclohexane to yield N-[2-(4-chlorophenoxy)phenyl]propanamide (109 mg, 0.395 mmol), Example 14, in 91% yield. LCMS ESI+: 276 [M+H]+, Rt 9.1 min (LCMS 01).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(4-Chlorophenoxy)aniline, its application will become more common.

Reference:
Patent; Bioversys AG; Schneider, Peter; Riedl, Rainer; Tigges, Marcel; Gitzinger, Marc; Pieren, Michel; Levi, Assaf; Sephton, Mark; Schellhorn, Birgit; Zueger, Patrik; Brand, Michael; Gygax, Daniel; Spies, Peter; EP2762134; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

A common heterocyclic compound, 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, molecular formula is C12H10ClNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 2770-11-8.

To a stirred and cooled solution of 2-(4-chlorophenoxy)aniline (330 mg, 1.50 mmol) and triethylamine (230 muL, 1.65 mmol) in toluene (5 mL), the appropriate acid chloride (pivaloyl chloride, 2,2-dimethylbutyryl chloride, 3-methylbutyryl chloride, propyl chloride, cyclopropanecarbonyl chloride, cyclobutanecarbonyl chloride, methyl succinyl chloride, 4-methoxybenzoyl chloride) (1.65 mmol) was added. Subsequently the reaction mixture was allowed to warm to room temperature. The progress of the reaction was monitored by TLC. After 2-9 h the reaction mixture was extracted with a saturated sodium hydrogen carbonate solution, with a hydrogen chloride solution (10%), with brine and finally with water. Afterwards the organic solution was dried over sodium sulfate and evaporated under reduced pressure. The residue was further purified by recrystallization or column chromatography over silica gel. N-[2-(4-Chlorophenoxy)phenyl]-2,2-dimethylpropanamide (1): Crystallization from ethanol (70%) yielded slightly brown needles (277 mg, 0.92 mmol, 61%); m.p.: 99-100 C ; IR (KBr): [cm-1] nu = 3336 (br, N-H), 1663 (s, C=O); 1H-NMR: (400 MHz, DMSO-d6) delta [ppm] = 1.05 (s, 9H, C(CH3)3), 6.80-7.01 (m, 2H, arom. H), 6.99-7.15 (m, 1H, arom. H), 7.15-7.32 (m, 2H, arom. H), 7.27-7.48 (m, 2H, arom. H), 7.56-7.78 (m, 1H, arom. H), 8.72 (s, 1H, NH); 13C-NMR: (101 MHz, DMSO-d6) delta [ppm] = 26.95 (3C, CH3), 118.40 (2C), 120.46, 124.63, 126.13, 126.62, 129.49 (2C) (CH), 38.12, 126.38, 130.28, 147.84, 155.91 (C), 176.13 (C=O); C17H18ClNO2 (303.78): calcd. C 67.21, H 5.97, N 4.61, found C 67.13, H 6.00, N 4.51; EI-MS: m/z (%): 303.1 [M]+ (28), 176.1 [M – 127]+ (100); HPLC: 99.7% at 254 nm, 99.9% at 280 nm; tR = 7.42 min, tM(DMSO) = 1.06 min (ACN/H2O 60:40), lambdamax [nm] = 230, 275; HPLC-gradient: 99.4%, tR = 13.62 min, tM(DMSO) = 1.28 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(4-Chlorophenoxy)aniline, its application will become more common.

Reference:
Article; Weidner, Thomas; Nasereddin, Abed; Preu, Lutz; Gruenefeld, Johann; Dzikowski, Ron; Kunick, Conrad; Molecules; vol. 21; 2; (2016);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

A common heterocyclic compound, 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, molecular formula is C12H10ClNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 2770-11-8.

Preparation of l-(4-(2-(4-chIorophenoxy)phenylamino)azepan-l-yI)ethanoneSTX1762 C20H23ClN2O2, MW: 358.86To a solution of 2-(4-chlorophenoxy)phenylamine (113 mg, 0.51 mmol), 1-acetylazepan-4-one (159 mg, 1.02 mmol) and acetic acid (153 mg, 2.55 mmol) in DCE (4 ml), was added sodium triacetoxyborohydride (270 mg, 1.28 mmol). The reaction mixture was allowed to stir at room temperature for 10 days. On return, the reaction was quenched with saturated aqueous sodium sodium bicarbonateonate (15 ml) and extracted with ethyl acetate (2 x 15 ml). The combined organics were dried (MgSO4), filtered and concentrated in vacuo. Purification by flash chromatography then proceeded (eluent; 9:1 hexane:ethyl acetate to ethyl acetate) to afford the title compound as a pale yellow oil (67.1 mg, 37%).1H NMR (270 MHz, CDCl3): delta 1.49-2.27 (9H, m, 3 x CH2, CH3), 3.30- 3.72 (5H, m, 5 x CH), 4.10 (IH, br s, NH), 6.59-6.67 (2H, m, Ar-H), 6.78-6.89 (3H, m, Ar-H), 7.00-7.08 (IH, m, Ar-H), 7.21-7.24 ppm (2H, m, Ar-H). 13C NMR (67.93 MHz, CDC13): delta 21.9, 24.2, 25.3, 32.8, 33.0, 34.2, 35.2, 42.0, 45.0, 45.1, 48.3, 51.0, 52.0, 112.2, 118.6, 118.7, 125.4, 129.7, 129.8, 139.0, 142.8, 156.1, 156.2, 170.5 ppm. LCMS: EPO M+U: 359.45 HPLC: 95.92% (2.677 min, isocratic 90% acetonitrile, 10% water at 1 ml/min).

The synthetic route of 2-(4-Chlorophenoxy)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; STERIX LIMITED; WO2007/3934; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

2770-11-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, This compound has unique chemical properties. The synthetic route is as follows.

A solution of 2-(4-chloro-phenoxy)-phenylamine (100 mg, 0.46 mmol) and N-(2-formyl- phenyl)-acetamide (74 mg, 0.46 mmol) in anhydrous DCM (5ml) was stirred at r.t. and to this was added TiCl(O1Pr)3 (0.25 mL, 1 mmol). The resulting mixture was stirred for a further 4 h at room temperature. The mixture was then evaporated to dryness to yield the desired product. As in Method 1 (see above) the product could easily be identified by 1H NMR. The product was used crude in all following experiments.1H NMR (CDCl3, 270 MHz,): delta 2.03 (3H, s, CH3), 6.87-7.46 (HH, m, ArH), 8.60 (IH, s, N=CH), 8.72 (IH, d, J= 8.5 Hz, ArH). 13C NMR (CDCl3, 101 MHz): 24.9 (CH3), 116.7, 119.2, 119.6, 120.3 (ArCH), 120.6 (ArC), 122.5, 125.0, 127.9 (ArCH), 128.2 (ArC), 129.8, 132.7 (ArCH), 140.4, 141.7, 149.6, 156.1 (ArC), 163.4 (CH), 169.9 (CO).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; STERIX LIMITED; WO2009/66072; (2009); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2770-11-8. 2770-11-8

Preparation of {4-[2-(4-chlorophenoxy)phenylamino]-piperidin-l-yl}- cyclopentylmethanone STX1685 C23H27ClN2O2, MW: 398.94To a solution of 2-(4-cUorophenoxy)phenylarnine (100 mg, 0.45 mmol), 1- cyclopentylcarbonyl-4-piperidone (144 mg, 0.735 mmol) and acetic acid (147 mg, 2.45 mmol) in DCE (1.5 ml) was added sodium triacetoxyborohydride (260 mg, 1.23 mmol). This solution was then heated at 100C for 15 minutes hi a CEM discover microwave (fixed hold time set to on). The reaction mixture was then quenched with saturated aqueous sodium bicarbonate solution (5 ml) and extraction with ethyl acetate (3 x 5 ml) EPO followed. The combined organics were concentrated in vacuo and purification by flash chromatography proceeded (eluant: 8:2 hexane: ethyl acetate) to provide the title compound as a transparent oil (82 mg, 43%). 1H NMR (300 MHz, CDCl3): delta 1.16-1.36 (2H, m, 2 x CH)3 1.47-1.56 (2H, m, 2 x CH), 1.59-1.78 (6H, m, 6 x CH)5 1.93-2.08 (2H, m, 2 x CH), 2.76-2.87 (2H, m, 2 x CH), 3.07-3.18 (IH, m, CH), 3.43-3.52 (IH, sept, J = 3.9 Hz, CH), 3.78-3.89 (IH, bd, J = 13.8 Hz, CH), 3.97-4.10 (IH, m, CH), 4.31-4.42 (IH, bd, J = 13.5 Hz, NH), 6.55-6.62 (IH, td, J = 1.5, 1.2, 1.2, 7.7 Hz, ArH), 6.68-6.71 (IH, dd, J = 1.5, 8.1 Hz, ArH), 6.73-6.77 (IH, dd, J = 1.5, 8.1 Hz, ArH), 6.79-6.84 (2H, m, ArH), 6.95-7.01 (IH, td, J = 1.5, 0.6, 1.5, 7.7 Hz, ArH), 7.16-7.22 ppm (2H, m, ArH). 13C NMR (67.93 MHz, CDC13): delta 19.5, 19.6, 30.2, 32.2, 33.2, 40.6, 44.1, 49.9, 112.2, 117.2, 118.8, 119.6, 125.3, 127.9, 129.8, 138.9, 143.1, 156.1, 175.4 ppm LCMS: M+H: 421.46 HPLC: 98.41% (3.124 rnin, isocratic 90% acetonitrile, 10% water at 1 rnl/min).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(4-Chlorophenoxy)aniline.

Reference:
Patent; STERIX LIMITED; WO2007/3934; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

A common heterocyclic compound, 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, molecular formula is C12H10ClNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 2770-11-8.

2-(4-Chlorophenoxy)aniline (200 mg, 0.9107 mmol, 1.1 eq) and JV-(3-acetylphenyl)-iV- ethylacetamide (169 mg, 0.827 mmol, 1 eq) were stirred in dry dichloromethane (DCM) at room temperature for 10 min. Tri-isopropoxytitanium chloride (395 muL, 1.654 mmol, 2 eq) was added to the reaction mixture which was stirred at room temperature for 16 hours. Sodium triacetoxyborohydride (700 mg, 3.308 mmol, 4 eq) was then added to the reaction mixture and was stirred at room temperature for a further 24 h. The reaction mixture was then poured onto a solution of saturated aqueous sodium bicarbonate (100 mL) and extracted with DCM (120 mL). The organic layer was washed with brine (120 mL), dried over MgSO4, filtered and concentrated to give the crude as a yellow oil. Purification of the crude by flash chromatography (ISCO) eluting with a gradient [from 25% ethyl acetate in petrol ether to 50% ethyl acetate in petrol ether] gave (87 mg, 26 %) as a white solid. 1H NMR (270 MHz, CDCl3) delta 1.05 (3H, t, J = 8.1 Hz, CH3), 1.49 (3eta, d, J = 6.4 Hz CH3), 1.67 (3H, s, CH3), 3.68 (2H, q, J= 8.1 Hz, CH2), 4.45-4.60 (2H, m, NH and CH) 6.37 (1eta, d, J = 8.2 Hz, ArH), 6.57 (IH, dt, J = 1.4, 8.2 Hz ArH), 6.75-7.06 (6H, m, ArH), 7.23-7.39 (4H, m, ArH); 13C NMR (67.5 MHz, CDCl3) delta 13.1, 22.8, 25.0, 43.8, 52.8, 112.0, 112.9, 117.2, 118.7, 119.3, 125.0, 126.1, 126.5, 128. 0, 129.8, 130.0, 138.0, 139.1, 142.8, 147.1, 156.5, 169.9 LCMS (90% MeOH and 10% H2O; Symmetry C18 reverse phase column) tr = 2.88 min; (ES+), m/z 409.2 (35ClM’, 75%), 383 (37ClM’, 25%); HRMS (ESI) calcd. for C24H25ClN2O2 (M+H)+ 409.1605, found 409.1689. 99.48% purity.

The synthetic route of 2-(4-Chlorophenoxy)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; STERIX LIMITED; WO2009/66072; (2009); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 2770-11-8, name is 2-(4-Chlorophenoxy)aniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2770-11-8. 2770-11-8

Preparation of N-[2-(4-chlorophenoxy)phenyl]-3-acetamido-3-phenylpropanamide STX1858 C23H21ClN2O3, MW: 408.88 EPO To a pre-stirred solution of iV-acetyl-3-phenyl-beta-alanine (104 mg, 0.50 mmol), EDC (265 mg, 1.38 mmol), triethylamine (70 mg, 0.69 mmol) and DMAP (6 mg, 0.046 mmol) in anhydrous DCM (25 ml), was added 2-(4-chlorophenoxy)phenylamine (100 mg, 0.46 mmol). This mixture was then allowed to stir at room temperature for 14 h. The reaction mixture was washed with 2.5M NaOH (20 ml), 2M HCl (20 ml) and the organics were then dried (MgSO4), filtered and concentrated in vacuo. Purification by flash chromatography (eluant; DCM to 9:1 DCM:MeOH) then proceeded to afford the desired product as an off-white solid (58.9 mg, 31%). 1H NMR (270 MHz, CDCl3): delta 2.03 (3H, s, CH3), 2.83-2.99 (2H, m, CH2), 5.30-5.40 (IH, m, CH), 6.73-6.77 (IH, dd, J= 1.5, 8.2 Hz, Ar-H), 6.83-6.86 (2H, m, Ar-H), 6.95-7.03 (IH, td, J= 1.7, 7.9 Hz, Ar-H), 7.05-7.11 (IH, td, J= 1.7, 7.9 Hz, Ar-H), 7.19-7.30 (7H, m, Ar-H), 7.60 (IH, br s, Ar-H), 8.22-8.25 ppm (IH, dd, J – 1.5, 8.0 Hz, Ar-H). LCMS: M+H: 409.44 HPLC: 98.66% (2.268 mins, isocratic 90% acetonitrile, 10% water at 1 rnl/min).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(4-Chlorophenoxy)aniline.

Reference:
Patent; STERIX LIMITED; WO2007/3934; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics