Category: 363-51-9

Electric Literature of 363-51-9,Some common heterocyclic compound, 363-51-9, name is 2-Chloro-6-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 2-chloro-6-fluoroaniline (2.23 g, 15.32 mmol) in propionic acid (7.66 ml) was treated with propionic anhydride (2.369 ml, 18.38 mmol), and the reaction mixture was stirred at 90 C. for 1 h. After cooling to r.t., water was added and the solid precipitate was collected by filtration, washed with water, and air dried. The crude product obtained was used directly in the next step without further purification. LCMS calculated for C9H10ClFNO (M+H)+: m/z=202.0; Found 202.1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloro-6-fluoroaniline, its application will become more common.

Reference:
Patent; Incyte Corporation; Hummel, Joshua; Vechorkin, Oleg; Sokolsky, Alexander; Ye, Qinda; Liu, Kai; Yao, Wenqing; (60 pag.)US2020/48241; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 363-51-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 363-51-9, name is 2-Chloro-6-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 29 7-[(2-chloro-6-fluorophenyl)amino]-5-{ [2-methoxy-4-(piperazin-l- yl)phenyl]amino}pyrido[3.4-d]pyridazin-4(3H)-one EXAMPLE 29A /er/-butyl 4-(4-(7-(2-chloro-6-fluorophenylamino)-4-oxo-3,4-dihydropyrido[3,4-c/]pyridazin- 5-ylamino)-3-methoxyphenyl)piperazine-l -carboxylate A mixture of EXAMPLE 24A (370 mg, 0.76 mmol), 2-chloro-6-fluoroaniline ( 121 mg, 0.84 mmol), tris(dibenzylideneacetone)dipalladium (70 mg, 0.08 mmol), 2- dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl (44 mg, 0.1 mmol), potassium tert- butoxide (257 mg, 2.28 mmol) and teri-butanol (5 mL) was heated under nitrogen at 120C for 48 hours. The mixture was concentrated and the residue was dissolved indichloromethane, washed with saturated aqueous sodium bicarbonate and brine, dried over sodium sulfate, filtered and concentrated. The residue was purified by flash chromatography on silica gel (200-300 mesh) eluting with 98/2 dichloromethane/methanol to give the title compound. MS: 596 (M + H+).

The chemical industry reduces the impact on the environment during synthesis 2-Chloro-6-fluoroaniline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ABBOTT LABORATORIES; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; VASUDEVAN, Anil; PENNING, Thomas Dale; CHEN, Huanming; LIANG, Bo; WANG, Shaohui; ZHAO, Zhongqiang; CHAI, Dikun; YANG, Leifu; GAO, Yingxiang; WO2012/97682; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 363-51-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 363-51-9, name is 2-Chloro-6-fluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of triphosgene (408 mg, 1.37 mmol) in DCM (3 ml) was added 2-chloro-6-fluoro-aniline (200 mg, 1.37 mmol). The RM was cooled to 0 C and treated with triethylamine (402 mu, 2.89 mmol). The RM was stirred at rt for 1 h. The solvent was removed under reduced pressure to give the desired product as a white solid and it was used in the next step without further purification. MS ES+: 204.2 (in methanol).

The synthetic route of 2-Chloro-6-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NODTHERA LIMITED; BOCK, Mark G.; WATT, Alan Paul; PORTER, Roderick Alan; HARRISON, David; (229 pag.)WO2019/25467; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 363-51-9, name is 2-Chloro-6-fluoroaniline, A new synthetic method of this compound is introduced below., Computed Properties of C6H5ClFN

Acetic anhydride (10 mL, 106 mmol) was added to a solution of 2-chloro-6-fluoroaniline (12.81 g, 88 mmol) in AcOH (44 mL) and the mixture was stirred at 90 C. for 2 hrs. After cooling to r.t., water was added and the solid precipitate was collected by filtration, washed with water, and air dried to afford N-(2-chloro-6-fluorophenyl)acetamide (16.2 g, 98% yield) as a white solid. The crude product obtained was used directly in the next step without further purification. LCMS calculated for C8H8ClFNO (M+H)+: m/z=188.0; Found 188.0.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Incyte Corporation; Hummel, Joshua; Nguyen, Minh; Sokolsky, Alexander; Vechorkin, Oleg; Ye, Qinda; Yao, Wenqing; (72 pag.)US2019/315717; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 363-51-9, These common heterocyclic compound, 363-51-9, name is 2-Chloro-6-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 2-chloro-6-fluoroaniline (1.5 g, 10.3 mmol), pyridine (1.0 mL, 12.4 mmol), and isobutyric anhydride (2.0 mL, 12.1 mmol) was purged with nitrogen and irradiated in a microwave reactor at 150 C. for 2 hrs. After cooling to r.t., water was added and the mixture was stirred until a solid precipitate formed. The resulting solid was then collected by filtration, washed with water, and air dried to afford N-(2-chloro-6-fluorophenyl)isobutyramide in quantitative yield as an off-white solid. The crude product obtained was used directly in the next step without further purification. LCMS calculated for C10H12ClFNO (M+H)-: m/z=216.1; Found 216.1.

Statistics shows that 2-Chloro-6-fluoroaniline is playing an increasingly important role. we look forward to future research findings about 363-51-9.

Reference:
Patent; Incyte Corporation; Hummel, Joshua; Vechorkin, Oleg; Sokolsky, Alexander; Ye, Qinda; Liu, Kai; Yao, Wenqing; (60 pag.)US2020/48241; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 363-51-9,Some common heterocyclic compound, 363-51-9, name is 2-Chloro-6-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 39: 1 -( r2-(Butyloxy)phenvnmethyl)-Lambda/-(2-chloro-6-fluorophenyl)-1 H- pyrazole-3-carboxamide.; To 1-{[2-(butyloxy)phenyl]methyl}-1 H-pyrazole-3-carboxylic acid (0.558 g, 2.03 mmol) was added thionyl chloride (5 ml, 68.5 mmol) followed by Lambda/,Lambda/-dimethylformamide (0.01 ml, 0.129 mmol). The reaction was stirred at ambient temperature under nitrogen for 22 h. The reaction mixture was concentrated in vacuo, then redissolved in DCM and re-concentrated (x 2) to give 1-{[2-(butyloxy)phenyl]methyl}-1 H-pyrazole- 3-carbonyl chloride as a very pale orange gum which solidified on standing (61 1 mg). To a solution of 2-chloro-6-fluoroaniline (29.1 mg, 0.2 mmol, Avacardo research Chemicals) in chloroform (0.2 ml) was added Lambda/,Lambda/-diisopropylethylamine (0.034 ml, 0.2 mmol) and dimethylaminopyridine (2 mg, 0.016 mmol). 1-{[2- (butyloxy)phenyl]methyl}-1 H-pyrazole-3-carbonyl chloride (29.2 mg, 0.1 mmol) in chloroform (0.2 ml) was then added and the resulting solution stirred and heated at 70 0C under reflux for 2 h. The solvent was removed under a stream of nitrogen and then dimethylsulphoxide (0.6 ml) added. The reaction mixture was purified by MDAP on SUNFIRE C18 column (Method D). The appropriate fraction was concentrated in vacuo then under nitrogen flow to give the title compound (9.8mg); LCMS: (System3) MH+= 402, tRET = 1.33 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloro-6-fluoroaniline, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; COE, Diane, Mary; COOPER, Anthony, William, James; GORE, Paul, Martin; HOUSE, David; SENGER, Stefan; VILE, Sadie; WO2010/122088; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 363-51-9, name is 2-Chloro-6-fluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of 2-Chloro-6-fluoroaniline

C. 2-FLUORO-4-PHENYL-6-CHLOROANILINE 2-FLUORO-6-CHLOROANILINE (28.8 g, 0.2 mol) is suspended in a solution of sodium bicarbonate (17.2 g, 0.2 mol in 150 mL water) and warmed to 60C. Elemental iodine (50.8 g, 0.2 mol) is added portionwise and the resulting mixture stirred at 60C for 3 days. After cooling to room temperature, the reaction mixture is partitioned between CH2CI2 (350 mL) and saturated sodium bisulfite solution (500 mL). The aqueous layer is re- extracted with additional CH2CI2 (250 mL) and the combined organic layers dried (MGS04) and concentrated by rotary evaporator. The residual oil is purified by flash chromatography (9: 1 hexanes/EtOAc) to give 2-fluoro-4-iodo-6-chloroaniline (m. p. 85-87C). 2-Fluoro-4-iodo-6-chloroaniline (8.0 g, 36.0 MMOL) is dissolved in DMF (110 mL) and treated with 2.8 equivalents of PHENYLBORONIC acid (10.0 g, 82 MMOL), and a catalytic amount OF TETRAKISTRIPHENYLPHOSPHINE PALLADIUM (0) (3.0 g, 2.6 MMOL) as a solution in DMF (20 mL). Sodium carbonate (30 mL of 2 M aqueous solution) is added and the reaction mixture stirred and heated to 100C for 24 hours. After cooling to room temperature most of the DMF is removed by rotary evaporator under high vacuum. The residual brown oil is partitioned between ET20 (300 mL) and water (150 mL). The organic layer is washed with brine, dried (MGS04) and concentrated by rotary evaporator. The residual oil is purified by flash chromatography (9: 1 hexanes/EtOAc) to give 2-fluoro-4-phenyl-6-chloroaniline (m. p. 105- 107C).

The synthetic route of 363-51-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/48314; (2004); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 363-51-9,Some common heterocyclic compound, 363-51-9, name is 2-Chloro-6-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step B: Preparation of l-Chloro-3-fluoro-2-isothiocyanatobenzene To a solution of 2-chloro-6-fluorobenzenamine (5.0 g, 34 mmol) in chlorobenzene (52 mL) was added carbonothioic dichloride (thiophosgene) (5.1 g, 45 mmol) and DMF (0.27 mL). The reaction mixture was refluxed for 2 h and then concentrated to leave the title compound as a brown oil (6.15 g), which was used in Step C without further purification. H NMR 5 7.18 (m, 2H), 7.07 (m, 1H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloro-6-fluoroaniline, its application will become more common.

Reference:
Patent; E. I. DU PONT DE NEMOURS AND COMPANY; TAGGI, Andrew, Edmund; LONG, Jeffrey, Keith; BEREZNAK, James, Francis; WO2013/116251; (2013); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 363-51-9, name is 2-Chloro-6-fluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of 2-Chloro-6-fluoroaniline

A stirred solution of 9 4-hydroxy-2-methylsulfanyl-pyrimidine-5-carboxylic acid (5.70 g, 30.65 mmol, 1.0 eq) and 237 2-chloro-6-fluoro-aniline (4.50 g, 30.65 mmol, 1.0 eq) in 24 toluene (200 mL) was purged with nitrogen gas for 15 min. To the above solution 91 PCl3 (30 mL) was added. The reaction was heated at 100 C. for 72 h. Progress of reaction was monitored by LCMS. After completion of reaction, solvent was removed under reduced pressure, residue was diluted with a mixture of 238 diethyl ether: 30 MeOH (10:1) (100 mL) stirred for 15 min then filtered off. Solid was suspended in MeOH (20 mL), stirred for 5 min, filtered off and washed with MeOH (10 mL), and then dried under vacuum to obtain of 239 N-(2-chloro-6-fluoro-phenyl)-4-hydroxy-2-methylsulfanyl-pyrimidine-5-carboxamide (5.0 g, 52.8%). (0370) LCMS: 314 [M+1]+

The synthetic route of 363-51-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; giraFpharma LLC; Chakravarty, Sarvajit; PHAM, Son Minh; Kankanala, Jayakanth; AGARWAL, Anil Kumar; PUJALA, Brahmam; SONI, Sanjeev; ARYA, Satish K.; PALVE, Deepak; KUMAR, Varun; (360 pag.)US2019/106436; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 363-51-9, name is 2-Chloro-6-fluoroaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 363-51-9, Product Details of 363-51-9

To 2-chloro-6-fluoroaniline (0.183 g, 1.259 mmol) and 2-(2-chloroquinolin-8-yl)- 6,7-dihydro-lH-pyrrolo[3,2-c]pyridin-4(5H)-one (Example 1 ; 0.075 g, 0.252 mmol) was added LHMDS (1.0 M solution in THF ; 1.259 ml, 1.259 mmol). The reaction was sealed and stirred 1 h at RT, then for 3h at 70 C. The reaction was subsequently cooled to RT and stirred overnight. 1.5 mL DMSO and 10 drops TFA were added. The mixture was filtered and purified by rpHPLC (Phenomenex Gemini 150 x 30 mm Cis column, 10-80 % ACN/H20 with 0.1 % TFA). The product-containing fractions were concentrated in vacuo, and the residue was partitioned between saturated aq. NaHCC and DCM. The aq. layer was extracted with DCM (3x), and the combined organic extracts were dried over anhydrous Na2S04, filtered, and concentrated in vacuo. The material was dissolved in DCM/MeOH, adsorbed onto 0.75 g silica gel, and purified by silica gel chromatography using 0-50% 90/10 MeOH/DCM in DCM. The product-containing fractions were concentrated to separately afford 2-(2-((2-chloro-6-fluorophenyl)amino)quinolin-8-yl)- 6,7-dihydro-lH-pyrrolo[3,2-c]pyridin-4(5H)-one (0.022 g, 0.054 mmol, 21 % yield) as a light-yellow solid and 2-(2-((2-chloro-6-fluorophenyl)amino)quinolin-8-yl)-lH- pyrrolo[3,2-c]pyridin-4(5H)-one (0.0037 g, 9.14 muetaiotaomicron, 4%> yield) as a yellow solid. 2-(2- ((2-Chloro-6-fluorophenyl)amino)quinolin-8-yl)-6,7-dihydro-lH-pyrrolo[3,2-c]pyridin- 4(5H)-one (7): H NMR (400 MHz, DMSO-d6) delta ppm 11.82 (1 H, br. s), 9.34 (1 H, s), 8.16 (1 H, d, J=9.0 Hz), 8.01 (1 H, dd, J=7.6, 1.6 Hz), 7.55 – 7.67 (2 H, m), 7.41 – 7.54 (2 H, m), 7.28 (1 H, t, J=7.7 Hz), 7.13 (1 H, d, J=9.0 Hz), 6.83 – 6.98 (2 H, m), 3.32 – 3.44 (2 H, m), 2.43 (2 H, t, J=6.8 Hz), m/z (ESI, +ve) 406.9 (M+H)+. 2-(2-((2-Chloro-6- fluorophenyl)amino)quinolin-8-yl)-lH-pyrrolo[3,2-c]pyridin-4(5H)-one (12): H NMR (400 MHz, DMSO-de) delta ppm 12.09 (1 H, br. s), 10.68 (1 H, d, J=6.1 Hz), 9.41 (1 H, s), 8.1 1 – 8.26 (2 H, m), 7.43 – 7.76 (4 H, m), 7.34 (1 H, t, J=7.7 Hz), 7.18 – 7.25 (1 H, m), 7.14 (1 H, d, J=9.0 Hz), 6.86 – 7.00 (1 H, m), 5.91 (1 H, d, J=6.8 Hz). m/z (ESI, +ve) 405.2 (M+H)+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; AMGEN INC.; CEE, Victor; CHAVEZ, JR., Frank; CHEN, Jian J.; HARRINGTON, Essa Hu; HERBERICH, Bradley; JACKSON, Claire L. M.; LANMAN, Brian A.; NGUYEN, Thomas T.; NORMAN, Mark H.; PETTUS, Liping H.; REED, Anthony B.; SMITH, Adrian L.; TAMAYO, Nuria A.; TASKER, Andrew; WANG, Hui-Ling; WU, Bin; WURZ, Ryan; WO2013/130660; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics