Category: 39191-07-6

Related Products of 39191-07-6, These common heterocyclic compound, 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of Step 1 intermediate (100 mg, 0.64 mmol) in THF (6.0 mL) at 0C were added triethylamine (195 mg, 1.93 mmol) and 4-nitrobenzoyl chloride (132 mg, 0.70 mmol). The mixture was stirred for 2 h at room temperature. The reaction mixture was diluted with ethyl acetate (100 mL), washed with saturated aqueous sodium bicarbonate solution (20 mL)and saturated ammonium chloride solution (20 mL). The organic layer was washed with water (30 mL) and dried over anhydrous sodium sulfate. The residue thus obtained was purified by silica gel column chromatography to yield 152 mg of titled compound. ?H NMR (300 MHz,DMSO-d6): oe 2.82 (s, 3H), 2.94 (s, 2H), 7.38-7.44 (m, 5H), 7.68-7.77 (m, 3H).

The synthetic route of 39191-07-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLENMARK PHARMACEUTICALS S.A.; DAS, Sanjib; GHARAT, Laxmikant Atmaram; HARDE, Rajendra Laxman; THOMAS, Abraham; KHAIRATKAR-JOSHI, Neelima; SHAH, Daisy Manish; BAJPAI, Malini; (98 pag.)WO2017/199103; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 39191-07-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39191-07-6 name is 1-(3-Chlorophenyl)-N-methylmethanamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Diisopropylethylamine (0.07 mL, 0.40 mmol) was added to a mixture of 4-chloro-3-[(7-oxo-2-piperidin-1-yl-7,8-dihydro-pyrido[2,3-d]pyrimidine-6-carbonyl)-amino]-benzoic acid (0.05 g, 0.11 mmol) (from Example 61 supra) and HATU (0.076 g, 0.20 mmol) in DMF (2.0 mL). The resulting mixture was stirred at room temperature for 30 minutes. 3-Chloro-N-methylbenzylamine (Aldrich) (0.06 mL, 0.40 mmol) was added. The mixture was stirred for 18 hours and then partitioned between ethyl acetate and water. The precipitate was collected by filtration and washed with methanol and dried in vacuum oven to give 7-oxo-2-piperidin-1-yl-7,8-dihydro-pyrido[2,3-d]pyrimidine-6-carboxylic acid {2-chloro-5-[(3-chloro-benzyl)-methyl-carbamoyl]-phenyl}-amide. (Yield 0.040 g, 62.5%).HR-MS (ES+) m/z Calculated for C28H27Cl2N6O3 ([M+H]+): 587.1335. Found: 587.1340.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-(3-Chlorophenyl)-N-methylmethanamine, and friends who are interested can also refer to it.

Reference:
Patent; Anderson, Kevin; Chen, Yi; Chen, Zhi; Luk, Kin-Chun; Rossman, Pamela Loreen; Sun, Hongmao; Wovkulich, Peter Michael; US2012/184542; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 39191-07-6,Some common heterocyclic compound, 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, molecular formula is C8H10ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-(omega-Bromoalkyl)-isoindoline-1,3-dione (1 equiv) with N-methylbenzylamine (1 equiv) or its substituted analog in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 16 h. Once the reaction was finished, the solvent was evaporated under vacuum, producing a residue that was further dissolved in 50 mL of 5 M NaOH and extracted with ethyl acetate (3 x 50 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (dichloromethane to dichloromethane/methanol 98:2), yielding a yellow oil. The final product was obtained in the form of hydrochloride salt. The following compounds were obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(3-Chlorophenyl)-N-methylmethanamine, its application will become more common.

Reference:
Article; Guzior, Natalia; Bajda, Marek; Rakoczy, Jurand; Brus, Boris; Gobec, Stanislav; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 23; 7; (2015); p. 1629 – 1637;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 39191-07-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39191-07-6 as follows.

General procedure: To a solution of 2,6-bis(chloromethyl)pyridine (1 mmol) in anhydrous acetonitrile (10 mL) was added cesium carbonate (3 mmol) and the corresponding secondary amine (2.2 mmol). The reaction mixture was heated at reflux for 5 h. The resulting mixture was diluted with water (20 mL) and extracted with ethyl acetate (15 mL) three times. The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, and concentrated in vacuo. The crude was purified by column chromatography with methanol/dichloromethane (100:1, v/v) to give the title compound as a colorless liquid or a white solid.

According to the analysis of related databases, 39191-07-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Bai, Renren; Liang, Zhongxing; Yoon, Younghyoun; Liu, Shuangping; Gaines, Theresa; Oum, Yoonhyeun; Shi, Qi; Mooring, Suazette Reid; Shim, Hyunsuk; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 340 – 350;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 39191-07-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The procedure is as follows: 3 mg of catalyst CoPz (hmdtn) 4 is weighed into a quartz jacketed photoreactor, and then 25 mL of a reaction solvent, acetonitrile (abbreviated as CH3CN), is added. CoPz(hmdtn)4 was completely dissolved in CH3CN under stirring. Further, 0.01 mmol of the auxiliary 1,8-diazabicycloundec-7-ene (abbreviated as DBU) and 1 mmol of N-methylbenzylamine were added to the above system. Stirring was continued for 2 h in the dark. Then, at 1 atm oxygen and lambda ? 420 nm visible light (using a xenon lamp as a light source, a 420 nm filter is used to filter out light having a wavelength of less than 420 nm, The following examples are the same as the light intensity of 1.01 W·cm -2 ) for 3 h under light conditions. The reaction products were qualitatively analyzed and quantified by gas chromatography-mass spectrometry (GC-MS) and gas chromatography (GC). The experiment was recorded as Entry 1.

The chemical industry reduces the impact on the environment during synthesis 1-(3-Chlorophenyl)-N-methylmethanamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; South Central University for Nationalities; Yang Changjun; Jin Juanjuan; Deng Kejian; Zhang Bingguang; (12 pag.)CN108623494; (2018); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 39191-07-6,Some common heterocyclic compound, 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, molecular formula is C8H10ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-(omega-Bromoalkyl)-isoindoline-1,3-dione (1 equiv) with N-methylbenzylamine (1 equiv) or its substituted analog in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 16 h. Once the reaction was finished, the solvent was evaporated under vacuum, producing a residue that was further dissolved in 50 mL of 5 M NaOH and extracted with ethyl acetate (3 x 50 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (dichloromethane to dichloromethane/methanol 98:2), yielding a yellow oil. The final product was obtained in the form of hydrochloride salt. The following compounds were obtained.

The synthetic route of 39191-07-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Guzior, Natalia; Bajda, Marek; Rakoczy, Jurand; Brus, Boris; Gobec, Stanislav; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 23; 7; (2015); p. 1629 – 1637;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 1-(3-Chlorophenyl)-N-methylmethanamine

Diisopropylethylamine (0.073 mL, 0.42 mmol) was added to a mixture of 3-[(2-methoxy-7-oxo-7,8-dihydro-pyrido[2,3-d]pyrimidine-6-carbonyl)-amino]-4-methyl-benzoic acid (0.05 g, 0.14 mmol) (from Example 20 supra) and HATU (0.080 g, 0.21 mmol) (Aldrich) in DMF (2.0 mL). The resulting mixture was stirred at room temperature for 30 minutes. 3-Chloro-N-methylbenzylamine (0.061 mL, 0.42 mmol) (Aldrich) was added. The mixture was stirred for 18 hours. The mixture was partitioned between ethyl acetate and water. The precipitate formed was collected by filtration and washed with methanol and dried in vacuum oven to give 2-methoxy-7-oxo-7,8-dihydro-pyrido[2,3-d]pyrimidine-6-carboxylic acid {5-[(3-chloro-benzyl)-methyl-carbamoyl]-2-methyl-phenyl}-amide. (Yield 0.018 g, 26.1%).HR-MS (ES+) m/z Calculated for C25H23ClN5O4 ([M+H]+): 514.1252. Found: 514.1251.

The synthetic route of 1-(3-Chlorophenyl)-N-methylmethanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Anderson, Kevin; Chen, Yi; Chen, Zhi; Luk, Kin-Chun; Rossman, Pamela Loreen; Sun, Hongmao; Wovkulich, Peter Michael; US2012/184542; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C8H10ClN

General procedure: To a solution of 1,4-bis(bromomethyl)benzene (1 mmol) in anhydrous acetonitrile (10 mL) was added potassium carbonate (3 mmol) and the corresponding secondary amine (2.2 mmol). The reaction mixture was heated at reflux for 3 h. The resulting mixture was diluted with water (20 mL) and extracted with ethyl acetate (15 mL) three times. The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, and concentrated in vacuo. The crude was purified by column chromatography with methanol/dichloromethane (150:1, v/v) to give the title compound as a colorless liquid or a white solid.

The synthetic route of 39191-07-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Bai, Renren; Liang, Zhongxing; Yoon, Younghyoun; Liu, Shuangping; Gaines, Theresa; Oum, Yoonhyeun; Shi, Qi; Mooring, Suazette Reid; Shim, Hyunsuk; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 340 – 350;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 39191-07-6, These common heterocyclic compound, 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of Step 1 intermediate (100 mg, 0.64 mmol) in THF (6.0 mL) at 0C were added triethylamine (195 mg, 1.93 mmol) and 4-nitrobenzoyl chloride (132 mg, 0.70 mmol). The mixture was stirred for 2 h at room temperature. The reaction mixture was diluted with ethyl acetate (100 mL), washed with saturated aqueous sodium bicarbonate solution (20 mL)and saturated ammonium chloride solution (20 mL). The organic layer was washed with water (30 mL) and dried over anhydrous sodium sulfate. The residue thus obtained was purified by silica gel column chromatography to yield 152 mg of titled compound. ?H NMR (300 MHz,DMSO-d6): oe 2.82 (s, 3H), 2.94 (s, 2H), 7.38-7.44 (m, 5H), 7.68-7.77 (m, 3H).

The synthetic route of 39191-07-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLENMARK PHARMACEUTICALS S.A.; DAS, Sanjib; GHARAT, Laxmikant Atmaram; HARDE, Rajendra Laxman; THOMAS, Abraham; KHAIRATKAR-JOSHI, Neelima; SHAH, Daisy Manish; BAJPAI, Malini; (98 pag.)WO2017/199103; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 39191-07-6, name is 1-(3-Chlorophenyl)-N-methylmethanamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39191-07-6, Quality Control of 1-(3-Chlorophenyl)-N-methylmethanamine

General procedure: 2-(omega-Bromoalkyl)-isoindoline-1,3-dione (1 equiv) with N-methylbenzylamine (1 equiv) or its substituted analog in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 16 h. Once the reaction was finished, the solvent was evaporated under vacuum, producing a residue that was further dissolved in 50 mL of 5 M NaOH and extracted with ethyl acetate (3 x 50 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (dichloromethane to dichloromethane/methanol 98:2), yielding a yellow oil. The final product was obtained in the form of hydrochloride salt. The following compounds were obtained.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Guzior, Natalia; Bajda, Marek; Rakoczy, Jurand; Brus, Boris; Gobec, Stanislav; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 23; 7; (2015); p. 1629 – 1637;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics