A new synthetic route of (3-Chlorophenyl)methanamine

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4152-90-3.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4152-90-3, name is (3-Chlorophenyl)methanamine, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C7H8ClN

General procedure: To a solution of different amines (1 mmol) in ethanol (10 mL), ethylcyanoacetate (1.2 mmol) was added. The reaction mixture was stirred for 5-8 h under reflux. Progress of the reaction was monitoredby TLC. After completion of the reaction, the resulting mixture was cooled to 0-5 C in an ice bath and the solid separated was filtered off.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4152-90-3.

Reference:
Article; Shaik, Jeelan Basha; Palaka, Bhagath Kumar; Penumala, Mohan; Kotapati, Kasi Viswanath; Devineni, Subba Rao; Eadlapalli, Siddhartha; Darla, M. Manidhar; Ampasala, Dinakara Rao; Vadde, Ramakrishna; Amooru, G. Damu; European Journal of Medicinal Chemistry; vol. 107; (2016); p. 219 – 232;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Introduction of a new synthetic route about (3-Chlorophenyl)methanamine

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (3-Chlorophenyl)methanamine, its application will become more common.

Application of 4152-90-3,Some common heterocyclic compound, 4152-90-3, name is (3-Chlorophenyl)methanamine, molecular formula is C7H8ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of 5a (435mg, 1mmol), HATU (760mg, 2mmol), HOAt (272mg, 2mmol), substituted amine (1.2mmol) and DCM (10mL) at 0°C was added DIPEA (0.52mL, 3mmol), and the reaction mixture was then slowly warm to room temperature and stirred overnight. The reaction was quenched by water and the mixture was extracted with ethyl acetate, washed with water and brine, dried over Na2SO4 and then subjected to flash chromatography

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (3-Chlorophenyl)methanamine, its application will become more common.

Reference:
Article; Gao, Yang; Zhang, Peng; Cui, Anfeng; Ye, De-Yong; Xiang, Meng; Chu, Yong; Bioorganic and Medicinal Chemistry; vol. 26; 20; (2018); p. 5479 – 5493;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Research on new synthetic routes about 4152-90-3

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

4152-90-3, name is (3-Chlorophenyl)methanamine, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C7H8ClN

A solution of 8-chloro-3-((3aR,4S,6aS)-2,2-dimethyltetrahydrothieno[3,4-d][1,3]dioxol-4-yl)-[1,2,4]triazolo[4, 3-a]pyrazine (500 mg, 1.60 mmol), (3-chlorophenyl)methanamine (0.39 mL, 3.2 mmol) and TEA (0.68 mL, 4.8 mmol) in EtOH (8.0 mL) was stirred at 80° C. for 18 h. The reaction mixture was cooled to room temperature, diluted with DCM and washed with water and brine. The separated organic layer was dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by MPLC on SiO2 (2-5percent MeOH in DCM) to give N-(3-chlorobenzyl)-3-((3aR,4S,6aS)-2,2-dimethyltetrahydrothieno[3,4-d][1,3]dioxol-4-yl)-[1,2,4]triazolo[4,3-a]pyrazin-8-amine (2.40 g, 90percent) as a yellow oil. 1H-NMR (CDCl3, 400 MHz): delta 7.41 (m, 2H), 7.27 (m, 3H), 7.24 (d, J=4.8 Hz, 1H), 5.75 (d, J=5.2 Hz, 1H), 5.31 (t, J=4.0 Hz, 1H), 4.62 (s, 1H), 2.95 (m, 2H), 1.59 (s, 3H), 1.42 (s, 3H).

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HANDOK INC.; Lee, Jin-Hwa; Kim, Seung-Yong; Kim, Do-Ran; Ahn, Koo-Hyeon; Lee, Gwi-Bin; Kim, Doo-Seop; Hwang, Hyun-Sook; (74 pag.)US2017/204101; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

The important role of 4152-90-3

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 4152-90-3, name is (3-Chlorophenyl)methanamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4152-90-3, Computed Properties of C7H8ClN

General procedure: To a solution of benzylamine (0.6 mmol), indole (1.0 mmol) and CuI (0.1 mmol ) in CH3CN (1 mL) was added TEMPO (0.15 mmol) under atmosphere and the mixture was stirred at room temperature for overnight. The reaction mixture was concentrated under reduced pressure. The residue was purified by flash chromatography on silica gel (eluent: EtOAc/PE = 1:4) to yield the corresponding product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Liao, Meixiang; Zhang, Xiaoyun; Yue, Pengfei; Synthetic Communications; vol. 48; 13; (2018); p. 1694 – 1700;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Simple exploration of C7H8ClN

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

4152-90-3, name is (3-Chlorophenyl)methanamine, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: chlorides-buliding-blocks

General procedure: Amine (1 mmol), 2-aminothiophenol (2 mmol), BODIPY photosensitizer (0.01 mmol, 1.0 mol%), and acetonitrile (5 mL) were added to a dry 10-mL flask. The flask was pressurized with air (2 bar) and then heated to 50 C. The solution was then irradiated using a 35-W xenon lamp through a cutoff filter (0.72M NaNO2 aqueous solution, which is transparent for light >385nm, because lamps could emit a small amount of ultraviolet light). After the reaction was completed, the solvent was evaporated under reduced pressure. The crude product was further purified using column chromatography.

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhou, Zeyin; Yang, Weijun; Synthetic Communications; vol. 44; 21; (2014); p. 3189 – 3198;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

New learning discoveries about 4152-90-3

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4152-90-3, name is (3-Chlorophenyl)methanamine belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of (3-Chlorophenyl)methanamine

STEP7 Preparation of N-(3-chlorobenzyl)-3-((3aR,4S,6aS)-2,2-dimethyltetrahydrothieno[3,4-d][1,3]dioxol-4-yl)imidazo[1,2-a]pyrazin-8-amine A mixture of 8-chloro-3-((3aR,4S,6aS)-2,2-dimethyltetrahydrothieno[3,4-d][1,3]dioxol-4-yl)imidazo[1,2-a]pyrazine (500 mg, 1.60 mmol), (3-chlorophenyl)methanamine (0.236 mL, 1.92 mmol) and DIPEA (0.700 mL, 4.01 mmol) in i-BuOH (8.0 mL) was subjected to microwave irradiation at 170° C. for 4 h. (The reaction was repeated 4 times in same scale). The combined reaction mixture was cooled to room temperature, diluted with EtOAc and washed with water and brine. The separated organic layer was dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on NH-SiO2 (Hexanes:EtOAc=1:1) to give N-(3-chlorobenzyl)-3-((3aR,4S,6aS)-2,2-dimethyltetrahydrothieno[3,4-d][1,3]dioxol-4-yl)imidazo[1,2-a]pyrazin-8-amine (2.40 g, 90percent) as a yellow oil. 1H-NMR (CDCl3, 400 MHz): delta 7.44 (d, J=4.8 Hz, 1H), 7.39-7.40 (m, 2H), 7.26-7.25 (m, 4H), 6.32-6.24 (m, 1H), 5.10-5.05 (m, 2H), 4.78 (d, J=6.4 Hz, 2H), 4.55 (s, 1H), 3.05-3.04 (m, 2H), 1.60 (s, 3H), 1.38 (s, 3H).

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HANDOK INC.; Lee, Jin-Hwa; Kim, Seung-Yong; Kim, Do-Ran; Ahn, Koo-Hyeon; Lee, Gwi-Bin; Kim, Doo-Seop; Hwang, Hyun-Sook; (74 pag.)US2017/204101; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Continuously updated synthesis method about 4152-90-3

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4152-90-3, name is (3-Chlorophenyl)methanamine, A new synthetic method of this compound is introduced below., name: (3-Chlorophenyl)methanamine

5-[3-(3-Chloro-benzylamino)-phenyl]-5-methyl-5,6-dihydro-2H-[l,4]oxazin-3-ylamine a) (RS)- (3-Chloro-benzyl)-[3-(5-methoxy-3-methyl-3,6-dihydro-2H-[l,4]oxazin-3-yl)- phenyl] -amineA dried pressure tube was charged consecutively under a nitrogen atmosphere with a solution of (RS)-3-(3-bromo-phenyl)-5-methoxy-3-methyl-3,6-dihydro-2H [l,4]oxazine (150 mg, 0.5 mmol) in toluene (5 ml), sodium tert-butylate (157 mg, 1.6 mmol), 2-di-tert-butylphosphino-2′,4′,6′- triisopropylbiphenyl (ie/t-butyl-x-phos) (23 mg, 0.1 mmol), tris(dibenzylideneacetone)- dipalladium chloroform complex (17 mg), and 3-chlorobenzylamine (154 mg, 1.1 mmol). The sealed pressure tube was heated at 100 C for 15 hours. After cooling, the reaction mixture was evaporated to dryness and directly purified by chromatography on an Isolute flash NH2 column using a gradient of heptane/ethyl acetate = 100/0 to 50/50 as the eluent. 85 mg (47%) of (RS)- (3-chloro-benzyl)-[3-(5-methoxy-3-methyl-3,6-dihydro-2H-[l,4]oxazin-3-yl)-phenyl]-amine were obtained as a yellow oil. Mass (calculated) C19H21CIN2O2 [344.844]; (found) [M+H]+ = 345.

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; SIENA BIOTECH S.P.A; ANDREINI, Matteo; GABELLIERI, Emanuele; GUBA, Wolfgang; HILPERT, Hans; MAUSER, Harald; MAYWEG, Alexander V.; NARQUIZIAN, Robert; POWER, Eoin; TRAVAGLI, Massimiliano; WOLTERING, Thomas; WOSTL, Wolfgang; WO2012/98064; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Sources of common compounds: (3-Chlorophenyl)methanamine

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (3-Chlorophenyl)methanamine, its application will become more common.

Reference of 4152-90-3,Some common heterocyclic compound, 4152-90-3, name is (3-Chlorophenyl)methanamine, molecular formula is C7H8ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of ethyl 6-brorno-4-hydroxyquinazoline-2-carboxylate (0.891 g, 3 rnrnol) and brornotri(pyrrolidin-1-yl)phosphoniurn hexafluorophosphate (2.10 g, 4.50 rnrnol) in 1,4-dioxane (12 rnl) was added Et3N (1.254 rnl, 9.0 rnrnol). The rnixture was stirred at rt for 3 h and then (3-chlorophenyl)rnethanarnine (0.85 g, 6.0 rnrnol) was added. The rnixture was stirred at rt for another 5 h. The rnixture was poured into hexane/H20 (10 rnL/10 rnL). The solid was filtered and triturated with 3percent EtOAc/hexane and then dried to give ethyl 6-brorno-4-((3- chlorobenzyl)arnino)quinazoline-2-carboxylate (1.2 g, 2.85 rnrnol, 95 percent yield). The rnaterial wasused without further purification. MS (M+H)= 421.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (3-Chlorophenyl)methanamine, its application will become more common.

Reference:
Patent; STROVEL, Jeffrey William; YOSHIOKA, Makoto; MALONEY, David J.; YANG, Shyh Ming; JADHAV, Ajit; URBAN, Daniel Jason; (334 pag.)WO2017/91661; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Extended knowledge of C7H8ClN

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Electric Literature of 4152-90-3, A common heterocyclic compound, 4152-90-3, name is (3-Chlorophenyl)methanamine, molecular formula is C7H8ClN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of amide (5mmol), amine (5mmol), [Ru?NHC] complex (0.5molpercent) and toluene (5mL) was stirred in a sealed tube under nitrogen atmosphere at 110°C for 8h. After cooling down to room temperature, the reaction solvent was removed under vacuum. After removal of the solvent, the crude reaction mixture was dissolved in CH2Cl2 and purified by column chromatography on silica gel (200?400mesh) eluting with heptane:ethanol [25:1] to give corresponding amides as a white solid. The yields are mentioned in Tables 3?5. The product was confirmed by NMR spectroscopy. Reported isolated yields are an average of two runs.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Nirmala, Muthukumaran; Prakash, Govindan; Viswanathamurthi, Periasamy; Malecki, Jan Grzegorz; Journal of Molecular Catalysis A: Chemical; vol. 403; (2015); p. 15 – 26;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Share a compound : 4152-90-3

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Related Products of 4152-90-3, These common heterocyclic compound, 4152-90-3, name is (3-Chlorophenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N-(3-Chlorobenzyl)-5-fluoro-2-nitrobenzenamine:; 2,4-Difluoronitrobenzene (2.9 g, 18.1 mmol), 3-chlorobenzylarnine (2.6 g, 18.1 mmol) 0 and LambdazetaiV-diisopropylethylamine (2.4 g, 18.1 mmol) were stirred in acetonitrile (25 mL) at room temperature for 2 hours. The solvent was evaporated and the crude mixture was dissolved in dichloromethane and washed with water. The dichloromethane was evaporated in vacuo to collect the title compound (4.8 g, 95 percent yield). 1H NMR (400 MHz, CDCl3): delta 8.55 (s, IH), 8.25 (dd, IH), 7.32-7.21 (m, 4H), 6.41 (m, 2H), 4.50 (d, 2H).

The synthetic route of 4152-90-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PREDIX PHARMACEUTICALS HOLDINGS, INC.; WO2006/81332; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics