Category: 94-97-3

Adding a certain compound to certain chemical reactions, such as: 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 94-97-3, 94-97-3

General procedure: 1-phenylbutane-1,3-dione 1a (0.2 mmol, 32.4 mg), 1H-benzo[d][1,2,3]triazole 2a (0.2 mmol, 23.8 mg), N-bromosuccinimide (NBS) (39.2 mg, 1.2 equiv), KOtBu (44.8 mg, 2 equiv) and EtOAc (2 mL) were added to a flask with a magnetic stirring bar. The resulting mixture was stirred for 6 h at 60 oC. After cooling to room temperature, the mixture was diluted with ethyl acetate and filtered. The filtrate was removed under reduced pressure to get the crude product, which was further purified by silica gel chromatography (petroleum/ethyl acetate = 5/1-2/1 as eluent) to give product 3a and 4a as light yellow and pink solids. The identity and purity of the products was confirmed by 1H and 13C NMR spectroscopic analysis

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-1H-benzo[d][1,2,3]triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Chen, Wen-Lin; Li, Ji-Hui; Meng, Xu; Tang, Dong; Guo, Shuai-Bo; Chen, Bao-Hua; Tetrahedron Letters; vol. 54; 4; (2013); p. 295 – 299;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 94-97-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 94-97-3 name is 5-Chloro-1H-benzo[d][1,2,3]triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A solution of 5-chloro-1/-/-benzotriazole (1 53 g) in THF was added at 0C to a mixture of diisopropylic azodicarboxylate (2 ml_), triphenyl phosphine (2.9 g) and allyl alcohol (1.4 mL) in THF. After stirring one hour at 00C, the mixture was concentrated under reduced pressure to give a residue that was purified by chromatography (SiO2, heptane/EA) to afford 2-allyl-5-chloro-2/-/-benzotriazole (1.02 g, 53%). A mixture of 1- allyl-5-chloro-1/-/-benzotriazole and 1-allyl-6-chloro-1/-/-benzotriazole was also recovered (0.9 g, 47%). Alternatively, 2-allyl-5-chloro-2H-benzotriazole [4.87 g, 25%,Rf =0.4 (1 :3 EA/heptane)] was obtained using a procedure similar to that described in Example 1 , part a, except using 3-bromopropene. Similarly, a mixture of 1-allyl-5- chloro-1 H-benzotriazole and 1-allyl-6-chloro-1/-/-benzotriazole was also recovered [10.81 g, 56%, Rf =0.2 (1 :3 EA/heptane)]

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-1H-benzo[d][1,2,3]triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERIAL LIMITED; AVENTIS AGRICULTURE; WO2008/144275; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 94-97-3, 94-97-3

A mixture of 5-chloro-1H-benzotriazole (8 g), chloroacetone (6.5 mL), potassium carbonate (9.5 g) and potassium iodide (0.5 g) was stirred in acetone (90 mL) at room temperature for 48 hours. The reaction mixture was filtered and the filtrate concentrated under reduced pressure to give a residue that was purified by chromatography (SiO2, heptane/EA) to afford 1-(5-chloro-2H-benzotriazol-2-yl)-propan-2-one as clear oil [1.8 g, 16%, Rf=0.6 (1:1 EA/heptane)]. The two other regioisomers were also isolated, 1-(6-chloro-1H-benzotriazol-1-yl)-propan-2-one [3.8 g, 35%, Rf=0.45 (1:1 EA/heptane)] and 1-(5-chloro-1H-benzotriazol-1-yl)-propan-2-one [3.2 g, 29%, Rf=0.35 (1:1 EA/heptane)].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-1H-benzo[d][1,2,3]triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Soll, Mark David; Hir de Fallois, Loic Patrick Le; Huber, Scot Kevin; Lee, Hyoung Ik; Wilkinson, Douglas Edward; Jacobs, Robert Toms; Beck, Brent Christopher; US2010/125089; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 94-97-3, Recommanded Product: 5-Chloro-1H-benzo[d][1,2,3]triazole

General procedure: A mixture of azole (0.2 mmol), ketone (0.3 mmol, 1.5equiv.), NaHCO3 (33.6 mg, 2.0 equiv.), I2 (101.6 mg, 2.0 equiv.), and 1,2-dichloroethane (2 mL) was stirred at 80 C for 24 h. After cooling to room temperature, the reaction mixture was quenched with a saturated solution of Na2S2O3 (5 mL) and extracted with ethyl acetate (3×5 mL). The combined organic phases were washed with brine (10 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated. The residue was purified by flash column chromatograph, using a mixture of petroleum ether and ethyl acetate (5:1-2:1) as eluent to afford the corresponding products. The identity and purity of the products was confirmed by 1H and 13C NMR spectroscopic analysis.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Chen, Wenlin; Yan, Rulong; Tang, Dong; Guo, Shuaibo; Meng, Xu; Chen, Baohua; Tetrahedron; vol. 68; 38; (2012); p. 7956 – 7959;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Chloro-1H-benzo[d][1,2,3]triazole

a) A mixture of 5 g of 5-chlorobenzotriazole, 1.4 g of chloroacetone, 5.1 g of potassium carbonate and 0.5 g of potassium iodide is stirred into 50 mi of acetone at room temperature for 48 h. The mixture is subsequently filtered, the filtrate concentrated by evaporation in a vacuum, and the residue purified by flash chromatography. In this way, two isomeric products, [1- (5-CHLOROBENZOTRIAZOL-1-YI)-PROPAN-2-ONE] and [1-(6-CHLOROBENZOTRIAZOL-1-YL)-] propan-2-one, are isolated in approximately the same quantities, the first of which is then used directly in the next step.

The synthetic route of 5-Chloro-1H-benzo[d][1,2,3]triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/24704; (2004); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 5-Chloro-1H-benzo[d][1,2,3]triazole

General procedure: in EtOAc/MeOH (4:1) mixture solvent (2 mL), benzotriazoles 1 (0.3 mmol), sodium sulfinates 2 (0.54 mmol), NaBr (0.36 mmol) and mCPBA (0.39 mmol) were added successively. The suspension mixture was vigorously stirred at room temperature for 4 h. Upon completion, the reaction was quenched by addition of sat. aq. Na2S2O3 (2 mL), basified with sat. aq. Na2CO3(8 mL) and H2O (5 mL). The mixture was extracted with CH2Cl2 (3×5 mL) and the combined organic phase was dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure. The residue was then purified by TLC technique (3:1 (v/v) petroleum ether/ethyl acetate) to furnish sulfonylbenzotriazoles 3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 94-97-3.

Reference:
Article; Wu, Sixue; Zhang, Yikun; Yan, Jie; Synthetic Communications; vol. 46; 17; (2016); p. 1432 – 1437;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, This compound has unique chemical properties. The synthetic route is as follows., category: chlorides-buliding-blocks

A mixture of 5-chloro-1/-/-benzotriazole (8 g), chloroacetone (6.5 ml_), potassium carbonate (9.5 g) and potassium iodide (0.5 g) was stirred in acetone (90 ml.) at room temperature for 48 hours. The reaction mixture was filtered and the filtrate concentrated under reduced pressure to give a residue that was purified by chromatography (SiO2, heptane/EA) to afford 1-(5-chloro-2H-benzotriazol-2-yl)-propan-2-one as clear oil [1.8 g, 16%, Rf =0.6 (1 :1 EA/heptane)]. The two other regioisomers were also isolated, 1-(6- chloro-1 H-benzotriazol-1-yl)-propan-2-one [3.8 g, 35%, Rf =0.45 (1 :1 EA/heptane)] and 1- (5-chloro-1H-benzotriazol-1-yl)-propan-2-one [3.2 g, 29%, Rf =0.35 (1 :1 EA/heptane)].

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 94-97-3.

Reference:
Patent; MERIAL LIMITED; AVENTIS AGRICULTURE; WO2008/144275; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, A new synthetic method of this compound is introduced below., COA of Formula: C6H4ClN3

4-Nitro-5-chloro-1H-benzotriazole [22] 5-Chloro-1H-benzotriazole (3.08g, 20mmol) was dissolved in conc. sulphuric acid (40ml) and cooled to 0C on an ice bath. Nitric acid (40ml, excess) was added drop wise to the cooled solution over a period of 20 minutes. Stirring was continued for 1 hour at 0C and then at 60C for an additional 1 hour, by which time TLC (A) indicated the conversion of starting material. The solution was cooled to room temperature and poured over ice to precipitate a white solid. The solid was collected by filtration and washed with copious amounts of water until neutral to afford [22] in 83% yield. Rf(A) 0.49 deltaH(400MHz; DMSO-d6) 7.75 (1H, d, J8.8, BT) 8.38 (1H, br s, BT); m/z (EI-HR) 197.99383 [(M) calc. for C6H3N4O235Cl 197.99445] and 199.99345 [(M) calc. for C6H3N4O2 37Cl 199.99150].

The synthetic route of 94-97-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; University of Strathclyde; EP1272827; (2008); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 5-Chloro-1H-benzo[d][1,2,3]triazole

To a solution of 5-chloro-1H-benzotriazole (1 g) and sodium acetate (1g) in acetic acid was added bromine (2 g). After 10 days at room temperature, the mixture was treated with a saturated solution sodium thiosulfate, neutralized with a saturated solution of sodium bicarbonate and extracted with ethyl acetate. The organic phase was washed with brine, dried over anhydrous sodium sulfate, filtered and the filtrate concentrated under reduced pressure to afford a residue that was purified by semi- preparative liquid chromatography to afford 4-bromo-5-chloro-1 /-/-benzotriazole as an off-white solid (213 mg, 14%). MS (ES): M/Z [M+H]=232. 1H NMR: (400 MHz, DMSO-dbeta): 7.58 (d, J =8.7 Hz, 2H) and 7.91 (d, J =8.7 Hz, 1H).

According to the analysis of related databases, 94-97-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERIAL LIMITED; AVENTIS AGRICULTURE; WO2008/144275; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 94-97-3, These common heterocyclic compound, 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A 35-mL Schlenk tube, equipped with a magnetic stirring bar, was charged with 9H-xanthene 1a (137 mg, 0.75 mmol), 1H-benzo[d][1,2,3]triazole 2a (60 mg, 0.5 mmol), and BPO (242 mg, 1.0 mmol), followed by the addition of DCE (5.0 mL). The mixture was stirred at 80 C for 6 h; then it was quenched with saturated aqueous Na2S2O3 (2.0 mL), saturated aqueous K2CO3 (2.0 mL), and water (20.0 mL), and extracted with CH2Cl2 (20.0 mL) three times. The residue obtained after evaporation of the solvent was purified by column chromatography on silica gel (petroleum ether/ethyl acetate = 12:1, v/v) to afford 1-(9H-xanthen-9-yl)-1H-benzo[d][1,2,3]triazole 3a as a colorless crystal (144 mg, 96% yield).

Statistics shows that 5-Chloro-1H-benzo[d][1,2,3]triazole is playing an increasingly important role. we look forward to future research findings about 94-97-3.

Reference:
Article; Li, Yanni; Li, Yanping; Li, Yuan; Chen, Chunlin; Ying, Fengyuan; Dong, Ying; Liang, Deqiang; Synthetic Communications; vol. 49; 16; (2019); p. 2053 – 2065;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics